My built in camera is not workin my computer isnt detecting it at

check web cam settings in yahoo it may not have the web cam selected.

try to uninstall previously installed cam software and restart the pc and again install the cam drivers and after installing the drivers connect your webcam and check whether it is detecting or not? but be sure that you have proper webcam driver for your operating system.

Hi

If u want your front cam as a web cam connect your mobile with pc,and see your mobile u get 3or4 option select the Multimedia option and after few min u get the your cam is install your computer,
go to Setting ->Control Panel->Scanner and Camera->and click the cam.

Good Luck

Try NOT connecting your camera to your computer.


The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB or FireWire). This is likely to be faster than connecting the camera to the computer, and won't run down your camera's batteries.


Once the card is plugged in, it will appear to your computer as a removable drive. You can use the operating system's drag&drop facility to copy pictures from the card to the computer's hard drive, the same way you copy any other files. Or you can use any photo cataloging program such as Picasa.

First check whether the built in Camera is recognized in the Device Manager window under Imaging Devices or USB Controller.

Windows + R Key, type devmgmt.msc to access Device Manager.

If the Built in web cam is detected in Device Manager, then uninstall the Camera Device by right clickin on the device and selecting Uninstall option.

Once you uninstall the Driver, you can download and install the Camera Driver from the following link:

http://esupport.sony.com/US/perl/swu-download.pl?mdl=VGNCR510E&upd_id=3586&os_id=28

Download and install the Driver in your Computer. Then reinstall the ArcSoft WebCam Companion from the following link:

http://esupport.sony.com/US/perl/swu-download.pl?mdl=VGNCR510E&upd_id=3596&os_id=28

Then restart the Computer and use the Camera.

If the Built in Camera is not detected in the Device Manager, it means Hardware issue and service would be necessary.

However, you can use a USB Camera and use it with the USB Port in your Computer.

ok, uninstall all related drivers to this camera,


Now using the supplied disk install the camera software but please do not connect the camera YET, if the camera is already connected,
remove the camera and reboot,

so you installed the camera software now plug the usb camera in, it will now detect the install camera software and work.

Regards
gewiz.

i seems that your computer does not installed web came drivers. install it from the cd comes with the pc if you dont have one download from the acer web site.

i think you should change the camera it self not the driver problem because i had the same problem and i send back to acer, hope this can help you..

try smashing it up !!!

This isnt really a solution, but a question to my problem. You have your cam working on yours?...My mic works on mines, but not the cam. Can you help me out here?...
By the way, i would give you a solution, just im like 15, i just downloaded it without reading anything and stuff. sorry.>.<