How to resolve the problem c6000 Photocopier name Kyocera multifunctional km1650

You did not mention the brand name and model of your photocopier machine.But C-3451 is usually the code related to fusing unit/Heater Section.In order to get rid of this problem you have to reset the code.After resetting if the code appears again, then there is problem with thermisters, heat roller.

C6000 code is a fuser that failed to warmup.

Broken fuser heater lamp wire

The fuser temperature does not rise
after the fuser heater lamp has been
turned on.

Tttt

To resolve you will need a tech to replace parts in the fuser assembly.

Try adding the unit using the units IP Address.

Mr Thomas, this code means Fixing error, firsf switch on your Photocopier Machine then press 1,0,8,7 again 1,0,8,7 display will change will show u000. then press 1,6,3 press start key two times. machine will go off and on again. try that ,if will not work i will give you onather way.

You need to install the drivers first. before scanning. please download the drivers for scanning from samsung website. and for the photocopier problem please reset your printer.

if problem persists contact the vendor.

Hi, web site, should have your solution:-

The Canon imageRUNNER iR3300 Photocopier/Copier/Multifunction ...
The Canon imageRUNNER iR3300 Photocopier/Copier/Multifunction Printer/Multifunctional Device will handle all of your office or workgroup's tasks.
www.canoncopiers.co.uk > Discontinued Photocopiers

c3200 is related to the optics. in km1650 the scanner may be derailed. check and realign the wire. clean the lamp and the entire optics.

Canon photocopier IR2016J show error code E007. Please advised me on how to resolve

the c6000 error may be resettable.
the password will be 3200 or 6482.
once inside you need to be in copy mode and do the following

punch into the keybord 1087 1087
once you see 000 on the screen punch in 163 and hit the green button
you will then see the reset sequence, follow this and it should work.
please report if this works 

My name is Michael Harris and I am a representative for Ricoh. Your printing issues are unusual, however I am sure I can help you resolve them. 818-620-4659