Ep 2030 error code c06 - Minolta EP1030/1030F CS/PRO Copier

Replace the drum and developer if it can be found and run the correct service procedure

open the front door with power on in the upper left you should see a small panel remove the cover, press the small switch wait for ready to copy, if the code comes back do not reset the FUSER is bad it can start a FIRE ruining a perfectly good day!!!!!

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Missing two numbers on the end of the 00 is it 0070 or 0000?, 0000 is main motor drive 0070 is toner bottle issue.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

ATDC Sensor

C 0650 - Faulty scanner home position sensor.
Remove the glass and clean the home sensor.If the scanner moves smoothly remove foreign matter and other obstacles,clean the scanner rails,clean or change the scanner bushing.Place WD 40 oil on scanner bushings.

i can download it for you send me an email to forward it to you

This code not exist.Please the correct malfunction code.

here are the error codes for minolta

http://www.unitedtechsonline.citymax.com/page/page/4390333.htm

It means that the maintenance counter has reached its limit or you may have an error. If it is time for maint. then usually you replace the drum, cleaning blade, and developer (or the entire process unit) and reset the counters in service mode if the parts do not reset the counts automatically. Or you could simply reset the codes and not preform any replacements. Could you provide a bit more detail on the exact model number (EP-2010, EP-2030, etc...) and such and I can provide you more information on how to rectify the situation.

minolta cspro1054 turns off once you turn it on and code is c