Question about Fuji FinePix A345 Digital Camera

1 Answer

What size triwing screwdriver is required for A345. Which shop offers it in Toronto. Thanks!

The screen of my Camera is blurred. However if i give it two three hard taps then it seemed to work fine earlier. But now even tapping is not working. I guess may be some connection is loose inside so i want to open the camera. For this special triwing screwdriver is required. Can some one tell me which size tri-wing screw driver is required for subject camera and from where i can purchase it in Toronto ? Thanks !

Posted by qambar on

  • TheLItinker Nov 26, 2007

    The autofocus lens is jammed and won't go in and out. It happened at the time I tried push the tiny turn-off button at the top and at the same time it was going to shut down (I think)... I wanted to get inside as a last resort and see whether I could delicately un-jam it. It needs a phillips screwdriver with a three-blade tip rather than a four-blade tip. Each blade is ~1mm.



    [email protected]

×

Ad

1 Answer

Lindsey & Associates

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

  • Contributor
  • 50 Answers

How old is your camera, where did you buy it and how long ago, and where are you, what city are you in, and I will pull up the schematic and figure that out for you, let me know.
Aloha
Bobby

Posted on Nov 19, 2007

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need to master reset may Motorola Blur


To Hard Reset the Motorola BLUR MB300 quite differs from other Motorola ANDROID phones.

Do back up all your data stored on your device before doing this procedure, this process will delete all the data on the phone but does not delete the data stored on the microSD memory card.

To hard reset Motorola BLUR MB300
1. Power off phone.
2. Hold camera button and power on phone at the same time.
3. Release the camera button when prompted to.
4. You will see a message screen telling you to press the up or down volume button
5. Press and HOLD the down volume key (ignore message 'Volume Up Key Pressed')
6. When triangle and phone screen appears
7. Press on the screen just above the back key
8. You will now see the "Motorola system recovery" menu
At this point you will have three choices:

1. reboot system now [Menu+Back]
2. apply ssdcrad:update.zip [Alt+S]
3. wipedata/factory reset [Alt+W]
You can simply tap an item to select it.

At the bottom of the screen you can select OK to apply your choice from the menu.

There is also an opportunity to select Hide on the bottom left, I don't know what that does (I tried it and nothing happened).

Selecting Wipe data/factory reset and tapping Ok and the screen changes to a box and a phone (Get it - out of the box) and you see what is happening on the phone.
pick 2
-- Wiping data...
Formatting DATA:...
Formatting CACHE:...
Data Wipe Complete.

Press Menu+Back to reboot

pressing Menu+Back did nothing for me so I tapped 'reboot system now' on the menu and Ok.

The phone restart then will restore back to its factory default state.

Mar 20, 2011 | Motorola Cell Phones

1 Answer

Turn off, then turn on again


Hi,

try this out it worked for most of them who had a similar problem like urs:

Gently tap it twice at the end of the camera to ur palm and it will work again.
just tap it very lightly against the bottom of the camera holding it upright.

If this doesn't work then try giving it two three hard banging with your hands or just try tapping the camera on the table once.

Be carefull don't bang it that hard it may damage the cam.
And if the steps which i told you don't work then you will have to get it repaired.

Goodluck,
Please don't forget to rate the solution.

Mar 20, 2008 | Panasonic Lumix DMC-LZ3 Digital Camera

1 Answer

How do i do a master reset on a motorola blur


  1. Factory Data Reset
  • From the screen of your phone, open the Applications Tray. (arrow pointing up located in the middle at the bottom of the display screen)
  • Tap Settings.
  • Scroll down and tap SD and Card Storage.
  • Scroll down and tap Factory Data Reset.
  • Tap Reset Phone.

May 10, 2010 | Cell Phones

1 Answer

Sony Cyber-shot DSC- W55 takes blurry pictures


Hi!
The focus doesn't move as it should - it was stuck before you tapped it. Could be sand or something in it. I'm afraid you will have to give it away for a repair. You can contact your local Sony service center, but if they ask too much, I can offer you a very good price. My e-mail is [email protected]
I work in a Sony service center.

Hope this helps!

Tom

Jul 31, 2009 | Sony Cyber-shot DSC-W55 Digital Camera

1 Answer

What does access on screen of cyber-shot mean


"The lens is jammed and won’t open all the way. You have to bang on the camera and/or tug on the lens to release it from whatever is causing it to jam when it opens. I started with gentle tapping and tugging…but ended up giving it three good whacks on a tile floor and yanking on the lens like I was going to rip the thing right out of the camera. It kicked on and has been fine ever since." I kicked the camera hard on its left side and it worked!

Jul 04, 2008 | Sony Cameras

1 Answer

Digimax L60 issue


When I turn my l60 on, the lens doesn't open all the way. Usually I just use my finger to help it along... then earlier tonight I turned on the camera again to take pictures and all I had was a white screen. I took out the battery.. then the sd card, nothing worked.

I later came online and searched for solutions.. seems this is a common problem for other cameras as well.. I tried their methods.. they say to hold the camera and just tap on it.. I tapped on the Samsung logo a few times.. the white screen was still there.. and I gave up, turned the camera back off... then decided to try again, turned it on and now I have my lcd screen working again. O_o *shrugs* I'm not going to question how it got fixed, I just hope I don't get this problem again.

Nov 18, 2007 | Samsung Digimax L60 Digital Camera

3 Answers

My samsung digimax 503 has a white screen!


Oh my gosh this really works! Our screen went white, we hadn't dropped it or anything. The camera still worked fine but we just couldn't see what we were taking a picture of. We tried this solution and now we can see the picture through the screen perfectly. THANKS for posting this!

Nov 09, 2007 | Samsung Digimax A503 Digital Camera

12 Answers

ACCESS?!?!?!


I had to tap the entire front of the lense on the fat part of my palm. I had to do it 4 times semi-hard. Then the camera just popped on. Thanks for the tip, I did have to do it three times turning it off and on after each 4 strikes. The fifth time was a charm. I now have to do it every time to make my camera work. Crazy but it works.

Sep 11, 2007 | Sony Cyber-shot DSC-W70 Digital Camera

Not finding what you are looking for?
Fuji FinePix A345 Digital Camera Logo

Related Topics:

421 people viewed this question

Ask a Question

Usually answered in minutes!

Top Fuji Cameras Experts

Muntejaya Ginting
Muntejaya Ginting

Level 3 Expert

10422 Answers

Ekse

Level 3 Expert

13434 Answers

Lee Hodgson
Lee Hodgson

Level 3 Expert

4810 Answers

Are you a Fuji Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...