Set up of adsl router

Power cord
RJ-11 telephone cable coming from a splitter or the extn. line of your landline phone.
Ethernet cable coming from your Desktop/Laptop connecting RJ-45 port
Most standard ADSL modems have four/five lights in the front :
Power light to indicate electric power to the modem.
ADSL light indicates the status of ADSL sync. When the modem is synchronized with the ADSL line card at the other end of the circuit/loop, the DSL light will be steady green.
LAN light will glow steady green when the modem detects a successful link to a computer or router ethernet port.
ACT i.c. Activity light glows when the modem is sending and/or receiving data on the lan and wan. It will vary between very slow to fast flashing and steady green to indicate lan/wan traffic.


for more help visit CBR Tech Solutions

you need to configure wireless on router panel using the browser.

You need a router which connects to ethernet..ADSL is connected by RJ45(Telephone connection) ... Many cable companies include a router in the Modem (Verizon) others need a router to do wireless which gets connected between the PC and the Modem . the DSL-2750U is well over $2000.00.. a normal wireless router is $50-$100... a regular router gets connected by ethernet to Modem and router ,, then has 4 other connectors .. ehternet to PC.. Also requires power supply. .. wireless has to be setup for the software.

You have _THREE_ separate network connections to check:

1. your router, through your ADSL modem, to your ISP;

2. your computer, through an Ethernet cable, to your router;

3. your computer, through its wireless adapter, to the wireless adapter in your router.

So:

1. Connect the Ethernet cable from your laptop directly to your ADSL modem, bypassing the router.
Turn the router off.
Restart the modem.
Restart the computer.
Click Start
Click Run
Enter CMD and press ENTER
Enter IPCONFIG and press ENTER
You should get output like:
Ethernet adapter Local Area Connection:
* IP Address. . . . . . . . . . . . : 123.456.789.249
* Default Gateway . . . . . . . . . : 123.456.789.1
* Subnet Mask . . . . . . . . . . . : 255.255.255.0
Enter PING 123.456.789.1 and press ENTER
If PING does not respond, then telephone your ISP, and get them to trouble-shoot your connection.

2. Turn off the ADSL modem.
Connect the Ethernet cable from your laptop to one of the LAN ports on the router.
Turn the router on.
Restart your computer.
Click Start
Click Run
Enter CMD and press ENTER
Enter IPCONFIG and press ENTER
You should get output like:
Ethernet adapter Local Area Connection:
* IP Address. . . . . . . . . . . . : 192.168.0.100
* Default Gateway . . . . . . . . . : 192.168.0.1
* Subnet Mask . . . . . . . . . . . : 255.255.255.0
Enter PING 192.168.0.1 and press ENTER
If PING does not respond, then your router is not working.
If PING does respond, connect another Ethernet cable from the WAN port on the router to the ADSL modem.
Turn the modem on, and wait until the flashing-lights on the modem, and on the router, settle-down to a steady pattern.
Type PING WWW.GOOGLE.COM and press ENTER.
If PING responds, then everything is fine.

3. If you fix #1 and #2, above, then your wireless adapter should work.

TYPE-I Modem Configuration - Huawei SmartAX MT880 Modem / SmartAx MT882 ADSL Modem Configuration

SmartAx MT880 ADSL Modem has One ethernet Port.
SmartAx MT882 ADSL Modem has One ethernet Port and one USB Port.

Set your computer IP address as 192.168.1.2
( If you are using USB port, install USB driver first)

Open Internet Explorer in the Address bar type the URL http://192.168.1.1

You will be propted for Username and Password.

Username: admin

Password: admin


Click on Home


Click on WAN setting


Your WAN Setting should be as follows:

PVC No.: PVC0

Wan type: PPP

Connection Type : PPPoE

VPI / VCI : 0/35

Default Route : Enabled

Username: yourusername@dataone

Password: yourpassword

Use DNS : Enabled

Click on Apply.


You will be asked to save and reboot.

Select Yes


Once your modem is rebooted , the summary page will be displayed .


The "Green" status of PVC0 status indicated that you are now connected. (in Summary page)

SmartAx MT882 ADSL Modem ADSL LED will turn 'Orange' from 'green' when succesfully connected

virgin media is dsl not adsl which is the router you had

you need to ring your ISP to get a network user ID and password, when you enter these in to the router settings the Internet light will light up green.

the internet light, is usually a blinking green, showing that it's seeing the internet signal. The only reason it's red, is cause there's no net signal..double check the phone line going into the back of your router, and change it if you need to.

check your computers warranty here 4 FREE

Check to see if the SSID is being broadcast. That could probably you be your problem.

Thanks,

This picture will help you setting up adsl router:

http://www.ezlan.net/network/router.jpg