Two feet for this wok have sheared off. does anyone know if that type of part is available for DIY repair?

First I would find a repair depot for kitchen Aid and see if parts are still available for your model and if they will sell them to end users. They may also be able to help with a parts blowup diagram.

You need to replace the whole joypad.

You should try eBay it is great for this type of part.

Hi, here is a complete solution to fix your broken kitchen pasta attachment shear shaft.

http://www.ebay.com/itm/KitchenAid-Pasta-Roller-Attachment-KPSA-Repair-DIY-Hex-Shear-Shaft-Replacement-/281539451678

It will be hard to find a repairman and certainly not a DIY soldering project. That said, I would crazy glue the bottom rim thoroughly before giving up. Suggest get some idea from a reputable hardware/houseware store. Bev, Sorry no solution that's easy!

Here is the replacement part and instructions.

http://www.ebay.com/itm/KitchenAid-Pasta-Roller-Attachment-KPSA-Repair-DIY-Hex-Shear-Shaft-Replacement-/281539451678

Good on you for branching out and trying new types of foods. Here is an article with some wok tips that might help you. The best thing is to experiment and figure out by trial and error what kind of seasonings you like to cook with. Just make sure you oil the wok properly and don't clean it afterwards with an abrasive sponge;

http://rasamalaysia.com/top-12-wok-tips/

I don't have an answer yet but I know the broken alum stud is spot welded to the base. Anyone have alum type or experience in this area?
Jc

The best place for a DIY manual is www.ALLDATADIY.com their info is very accurate.