Question about Ricoh Office Equipment & Supplies

1 Answer

Pro c900. What does error code sc544 mean? - Ricoh Office Equipment & Supplies

Posted by mohamed aziz on

Ad

1 Answer

Freckled legs

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Habit-Forming:

    Visited the website for 3 consecutive days.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Ricoh Expert
  • 129 Answers

SC 544
Heating roller thermopile (center) error 3 The thermopile detected a temperature over 260?C. • TRIAC short, AC drive board defective • Defective IOB 2 • Defective BCU pro c900. What does error code sc544 mean? - sc_note_1.gif
Related SC code: SC 553, SC563 1. Do SP5810 to cancel the SC fusing code. 2. Replace the AC drive board. 3. Replace the IOB 2. 4. Replace the BCU.
GO TO SERVICE MODE AND SP5810 to Clear - Check temp inputs - SP5803 150, 151, 152

Posted on Mar 14, 2016

Ad

5 Related Answers

Anonymous

  • 1 Answer

SOURCE: Ricoh 1515 MF shows error code sc542

Um.. I don't see an "online" or "escape" button anywhere on the printer...

Posted on Jun 23, 2008

Ad

Anonymous

SOURCE: SC544 functional problems ERROR CODE ON REX ROTARY 1808D COPIER

fuser problem. Call for service

Posted on Jul 26, 2009

M2Tech1

Andy Bell

  • 313 Answers

SOURCE: error code SC998 on Ricoh Aficio 1045

The error code 998 is usually for the dimm or application boards read errors try taking the memory out and the app board out and reseat them again.. then go into the service mode via yellow clear button and then enter 107 then hold down the stop button till the panel changes and turn off the copier wait for 5 secs then turn back on.. If you dont know where boards are take the back panel off and on the right hand side there is a box with a steel plate on the dimms Ram..and app boards are there.. Good Luck A..

Posted on Jul 30, 2009

theinkjm7

  • 46 Answers

SOURCE: service code sc544

It is a fuser overheat error....really has to be checked by a technician...

note that any Ricoh tech can also do it as it is a Ricoh machine

Posted on Nov 06, 2009

Chris

  • 197 Answers

SOURCE: Ricoh 1022 service sc544

This is a code for the fuser, which indicates a very serious overheating condition. Your machine has something _seriously_ wrong with it, and should be looked at by a service technician.

SC544 - Fusing overheat error 2
A fusing temperature of over 251°C is detected by the fusing temperature monitor circuit in the SBCU board.
Potential Causes:
• Fusing thermistor defective
• Power supply board defective
• SBCU board defective

Posted on Nov 12, 2009

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Ricohmachine mp 5055 has sc code 554


The Ricoh copier error code SC544 / 544 is a fusing lamp overheat error code. (This is a hardware problem)

This error can mean the:
PSU board is bad
IOB board is bad
BICU board is bad

To reset this error try the code:
"Clear Mode"+107+"Clear/Stop" hold for 5s.
Turn ON and OFF the Main Switch.

If the problem persists you may need to contact a local service technician to take a look at your copier.

Jul 03, 2018 | Office Equipment & Supplies

1 Answer

Clear error code on SC544


What is it on?? If a printer unplug it & wait 1 min & plug back in. If still does it go to the Manufactures web page & look in Frequent answers.

I’m happy to help further over the phone at https://www.6ya.com/expert/wynn_5ba0205233ebfc15

Dec 14, 2014 | Office Equipment & Supplies

1 Answer

Error sc544


sc544 refers to heating unit failure to heat, could be bad heat lamp, blown thermostat , very dirty thermistor.

Feb 13, 2014 | Ricoh Aficio 3232c 3214c 1232c 1224c Oil...

1 Answer

Savin 8045 sc544


error 544 is associated with the fuser, call aechnician to change the thermisters and thermofuse of the fuser and the problem is solved
goodluck

Feb 05, 2014 | Gestetner Office Equipment & Supplies

1 Answer

Error sc:544


Hi


SC544 error means Fuser Overheat Error 1 (Hardware). This has happened due to Fuser Low Temperature which occurs due to Abnormal Hot Roller Fusing Lamp Lower Limit Temperature Detected. Try turning off & unplugging the copier for 10-20 minutes to check if error code resets. If it doesn

Oct 09, 2010 | Gestetner DSm615 Digital Imaging System

1 Answer

Gestetner 3225 error code SC544 - functional problem


SC544 indicates low fuser temperature during the warm up process. This means you have a problem with the fusing unit heating up. The fusing unit is located right where the paper exits the machine. Most common failure on these Ricoh's (Your Gestetner 3225 is made by Ricoh model aficio 250) is the fuser thermistor. This is a small electronic part that measures the temperature of the fusing roller. When they go bad they do not "see" the heat and therefor the code pops up. You are going to need to have a tech look at this for you as you will need to determine for sure which part is bad then you have to go into the service mode to reset this SC code before the machine will run.
Good Luck and Thank You for using Fixya.

Sep 07, 2010 | Gestetner Copier

1 Answer

Service code sc544


It is a fuser overheat error....really has to be checked by a technician...

note that any Ricoh tech can also do it as it is a Ricoh machine

Nov 06, 2009 | Gestetner DSc224 Copier

1 Answer

Epson AcuLaser C900 Printer


Error Code 6001 ~ 6999 are simply service required errors and are very general. I would imagine that if the tray is missing the printer will produce a fault. For starters it will think it has no paper and therefore will not try to pick up paper from the tray. If the tray is opened during operation I believe the printer stops, therefore there must be a sensor for the tray - no tray means sensor is operated. Best guess - fit a tray.

Apr 07, 2007 | Epson AcuLaser C900 Printer

Not finding what you are looking for?

Open Questions:

Office Equipment & Supplies Logo

Related Topics:

168 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ricoh Office Equipment & Supplies Experts

Bernard D'Souza

Level 2 Expert

164 Answers

Timothy Van Der...

Level 2 Expert

152 Answers

Cindy Wells

Level 3 Expert

6199 Answers

Are you a Ricoh Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...