Number are the pod to set turn - Cobra 78x 40 Channel Cb Radio With Microphone Dukes Of Hazzard General Lee

Unknown make pretty much. Not available, so do it by the number of buttons. They are all made in the same Chinese factory.

https://www.google.com/search?q=pod+501+watch+manual

4 button chronograph instructions

https://www.google.com/search?q=4+button+digital+chronograph+instructions

..

Question edited for full make model (what it is).
Question moved from Saturn Cars to Galaxy CB Radio category.

Tweaks and mods in the link

https://www.google.com/search?q=Galaxy+Saturn+Turbo+power+and+modulation+pods

..

Probably has MOSFET transistors in it and you cannot do a lot with those and they are easy to blow out if you set them wrong.

Hi, can you put the system in standby?
If you can, then try a system reset.
While the pod is in standby, hold input and settings on the pod unitl the firmware shows up.
Also make sure the control pod is adequately ventilated.

An i-pod provides a standard headphone level output. The AVR-1803 has nine RCA stereo inputs that will accept the signal from the i-pod. You need a 3.5mm stereo TRS plug on one end and two RCA plugs on the other end to connect your i-pod to your amplifier. Note: Be careful to select a 3.5 mm plug that has a slim enough plastic moulding to fit into the i-pod headphone output. On your amplifier you simply select the analogue input that you have chosen to use. Be careful of levels when you are setting up. Set the volume of your i-pod to about 50% and set the input sensitivity to zero, press play on your i-pod and gradually increase the gain on your amplifier input. Hope this helps, Don.

try updating your I-pod on the iTunes software on your computer if that doesn't work back up your I-pod on the iTunes and then reset your I-pod to factory settings. now if you backed your I-pod up properly then log back into your I-pod with your iTunes account and plug it into your computer, it should automatically restore all your apps and music ect. then you should be able to sync what ever u want again the problembeing is u probanlypicked up a virus or something on your I-pod

just go to the setting options and turn the tv out off and it should work fine,if not reset the settings to the default.

open I tunes, plug the i pod into the computer, when the i pod shows up on the left hand side of the screen, right click it and you should get an option to rename it

HELLO. IT SOUND'S LIKE SOME ONE HAVE TURNED UP THE V HIGHT ON YOUR SET. THERE SHOUND BE A CONTROL POD .!!! ON THE BACK OF YOR SET .!!! FOR THIS OR.!!! IT'S ON THE IN SIDE OF YOUR SET.!!! ON THE MAIN CHASSIE. .!!! YOU SOULD LOOK FOR IT.!!! AND TURN IT DOWN.!!! BUY TURNING IT CONNTER CLOCK WISE.!!! WITH A SMALL SCEWDRIVER.!!! TURN IT ABOUT 1/16MM. VERRY LITTLE.!!! LOOKING FOR THE VERTICAL SECTION ON THE CHASSIE YOU SHOULD SEE A SMALL POD .!!! WITH A V-HIGHT.!!! OR ONE WITH.!!! A (V-LENTERY).!!! THE HIGHT POD IS FOR THE CENTER OF YOUR SET UP..!!! & THE V-LENTERY .IS FOR THE CENTER OF YOUR SET GOING DOWN.!!! ONE IS FOR UP.!!! AND THE OTHER IS FOR THE PITCURE TO GO DOWN.!!! TURN THE UP CONNTER CLOCK WISE.!!! 1/16 MM. FISRT.!!! THAT SHOULD BRING YOUR PITCURE DOWN.!!! REMBER TO FIRST .!!! TO UNPLUG YOUR SET.!!! BEFORE TRY THIS.!!! AFTER UN[PLUGING IT DO THE AJUSTMENT.!!! THEN PLUG IT IN AND SEE WHAT HAPPEN.!!! REPET.!! TILL YOU HAVE IT TO THE HIGHT YOU WANT.!!! HOPE THIS HELP'S YOU .!!! LET ME KNOW.!!! OK " GOOD LUCK"