Can I show pictures from my I Pad on my tv? - Televison & Video

This is how apple designed their adapter for iPad to tv. Sadly there is no way to change this.

I can't show you a picture of brake lining wear but I can explain what it is. Brake lining wear is your brake pad wear. If the instrument cluster is showing "brake lining wear' ' visit workshop' it means your brake pads have worn down and are now at the brake pad wear sensor.

>What is the model of your Y510?
>First make sure that the model of your computer is the one with TV Tuner on it (Y510 with model number 7758-44Q has a TV Tuner on it)
>If you do make sure you installed the driver compatible with your Operating System
>if you look at this link:
http://consumersupport.lenovo.com/us/en/DriversDownloads/drivers_list.aspx?CategoryID=12
>it will show you 2 drivers for the TV Tuner one compatible with Windows Vista 32bit and Win XP
>If you are sure you have downloaded the one for XP then just tweak the settings of yuor TV Tuner and look for LIVE TV.

these are just tips and not a total resolution to the problem but still your comments suggestions ratings and testimonials will greatly be appreciated

I see pictures that show an extra device beneath the Hi-Hat and the ads mention a "stereo hi-hat controller"... on the RHH130 there is a clutch to improve the feel of the Hi Hat... I think this is what you see in some ads.

Cut and paste:

This hi-hat pad design attaches to a standard hi-hat stand. Inside of the pad is a sensor system and built-in hi-hat clutch that feels,realistic when pressed. The RHH130 also features a dual zone design consisting of pad and edge sections that offer greater dynamic realism. The pad can also produce a foot splash.

my TV locked, but the password had not been activated. what can i do

to make sure your av cord or game console is functioning properly, try using it to another tv.or use the said tv with a dvd player.you will know which is which.

I too have this problem with no help from hh Gregg, where I bought the tv, and no help from Toshiba. I resorted to calling the BBB and complaining about the defective workmanship. I took the tv, which is less than 2 years old, apart and found the y-sus board, behind the y-sus board is a foam rubber spacer to seperate the circut board from the backside of the screen. I think this pad is designed to prevent heat buildup in the y-sus board. The pad itself is held on by glue and that glue melted causing the y-sus board to short out. I noticed this after finding a tacky substance behind the board. The heat from the plasma screen melted this and also the pad itself. Toshiba claims no resposibility because the tv was out of warranty. Thanks Toshiba.

Hold your finger on the pad when turning on till it beeps to reset video. let me know if this helps.

I need a code to unlock my TV its a VS-5004R mitsubishi TV?

do you need to change the Source on the TV?