Question about Toymax Viore 42 in. Plasma TV

Open Question

Viore t.v. same problem but if i disconnect ysus board will stay on

Still doing same thing on and off but if i disconnect y board stays on volts are correct to y & z boards

Posted by john marsh jr on

Ad

1 Related Answer

Anonymous

  • 124 Answers

SOURCE: my hdmi connection wont stay on on my vior plasma 42 inch

You may have used Monster cables which can expand the plug in the TV.
Sorry, but you'll need to get a new input or use tape to hold it in.

Posted on Jun 12, 2010

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
2answers

I have sound with no picture. how do you tell which board, the x or y is bad? lg50pc5d

it might be one of three actually, it could be the ysus, xsus or buffer boards.Unfortunately i cant find a free version of the service manual, but i am sure you can buy a cheap one from ebay. I would get one of those and that will explain how to derive which board has gone bad
0helpful
1answer

Hi. I have a Zenith 42" plasma TV - Z42PQ20 that's

I had this exact problem on my TV, everything said it was the power board. It wasnt, luckily i was able to return that board. It was the YSUS board.

I should have done this this first but this is how i verified the old power board was good. Unplug TV, take the cover off and disconnect the wire harness going to the YSUS, plug TV in and turn on. If led stay blue its the YSUS.
1helpful
2answers

I turn it on and it turns itself right back off

The Zsus and or the Ysus boards are common failures. You can unplug the Zsus board from the power supply and if the power stays on, I would replace both the Zsus and Ysus boards.
I hope this helps,
Skyassoc
4helpful
2answers

MY VIORE PDP42V18HA HAS NO PICTURE ONLY SOUND 1 BLOWN T4 FUSE ON VIDEO BOARD CANT FIND A CERAMIC FUSE TO BUY

it is the y-sustain board that has a blown fuse.. it is problably the one on the left. by replacing the fuse wont solve the issue, you need to replace the whole board.
1helpful
1answer

My viore tv wont stay on it keeps going off by its

Ur tv the projection lamp,inside the tv now,been on an in used about 4 or 5 hours a day,the bulb been inside tv about 1 1/2 or 2 years?The projection lamp life is over,reqiure changing?Turn tv on hear alot of clicking too?The board call the Ballast board also require changing too,this Ballast board help to ignite the projection lamp.
2helpful
1answer

No power up

The YSUS Board Was Bad
0helpful
1answer

Green lite comes on for about 2 to 3 seconds then shuts down red lite pulses

If the back was off the board on the left is your Ysus board. It will have a cable plugged into the right side of the board from the signal board. Unplug the the Ysus board. If it stays on without a picture change both Y and Z sustain boards. If this helps let me know.
Not finding what you are looking for?
Toymax Viore  42 in. Plasma TV Logo

Related Topics:

67 views

Ask a Question

Usually answered in minutes!

Top Toymax Televison & Video Experts

Ekse

Level 3 Expert

13435 Answers

The Knight
The Knight

Level 3 Expert

76799 Answers

Tom Chichester

Level 3 Expert

62182 Answers

Are you a Toymax Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...