How do I tune the new channels, also I have lost a main channel. Where is the auto tune button on remote

Hi
Before tuning the set to auto tune mode, make sure the antenna or cable, whatever may, connected to its appropriate sockets at the back of the set firmly. To make it autotune:

As new services are broadcast, it will be necessary to

re-tune the television in order to view them.

Auto Tuning will completely re-tune the television

and can be used to update the channel list. It is

recommended that Auto Tuning is run periodically to
ensure that all new services are added. All current

channels and settings, i.e. locked channels, will be
lost.

[1] Select the SETUP from the main menu by using

Up or Down buttons. Press OK and Setup menu
will be displayed.

[2] Select the Installation from the Setup menu

by using Up or Down buttons. Press OK and
Installation menu will be displayed.

]3] Select Automatic Channel Scan from the Installation

menu by using Up or Down buttons and press OK.

A screen will appear warning that previous digital

programmes and settings will be deleted. Select Yes
and press OK to continue with the Auto tuning.

The television will start to search for all available

stations.You must allow the television to complete

the search. When the search is complete the Auto

tuning screen will display the total number of
services found.

* After search is completed for digital channels, a

message asking whether to search for analogue
channels appears on the screen

** Press the OK button to search for analogue

channels. The following menu appears on the screen
for analogue channel search
OK.

It sounds silly , but press the input button on your remote controll untill TV is hilighted . press 3 on the remote , then go back into the menu and see if the auto tune option can be selected.

The retuning process is as follows:

1. Press the [i+] button on the remote control to display the DIGITAL INFO menu.
2. Press the BLUE button to display the MAIN MENU.
3. Press the UP or DOWN buttons to highlight AUTO TUNING then press the OK button to display the AUTO TUNING MENU.
4. Press the RED button to start the auto tuning process for all available digital channels.
5. Wait for the process to complete.

If you wish to CANCEL the auto tuning process whilst it is processing then press the BLUE button at any time.

You may lose some channels when you retune the TV as the channels have been rearranged. To locate them look at the EPG although you may still find that some channels are no longer available on FREEVIEW. See the following link for additional information

http://www.freeview.co.uk/_retuneinfo/

Just run scan using your remote

The retuning process is as follows:

1. Press the [i+] button on the remote control to display the DIGITAL INFO menu.
2. Press the BLUE button to display the MAIN MENU.
3. Press the UP or DOWN buttons to highlight AUTO TUNING then press the OK button to display the AUTO TUNING MENU.
4. Press the RED button to start the auto tuning process for all available digital channels.
5. Wait for the process to complete.

If you wish to CANCEL the auto tuning process whilst it is processing then press the BLUE button at any time.

You may lose some channels when you retune the TV as the channels have been rearranged. To locate them look at the EPG although you may still find that some channels are no longer available on FREEVIEW. See the following link for additional information

http://www.freeview.co.uk/_retuneinfo/

l. Push the "Menu button"
2. Push the "Menu button" again
3. Scroll to "Setup" and push "OK"
4. Scroll to "Guide setup" and push "OK"
5. Scroll to"No Auto Tune"
6. Click on arrow next to "No Auto Tune". This will change it to "Auto Tune".
7. Now exit, or just punch in any channel number.

You should now be able to go directly to a channel without entering zeros.

press info button on the remote then goto tuning on the blue screen menu. say yes to auto tune then save.

TV SETTING
1. Press the MENU button.
2. Use or button to select the TV setting menu, then press or button.
3. Use or button to select the Channel no. setting and use the or button
to change from AIR (over-the-air broadcasts) to CABLE (cable/satellite broadcasts).
4. Use or button to select the Tuning mode and use the or button.
5. Use or button to select the Auto tune and press or button to
confirm the selection. The unit will immediately search through all possible TV
channels and store those channels with signals in memory. After this is complete,
the unit will switch to the first channel found.
6. To exit the MAIN MENU and return to the normal screen, press the EXIT button.
Note : In DVD mode, this option is not available.
Remarks:
1. Channel no. : 2-69 channel for Air mode, 1-125 channel for Cable mode.
2. Tuning mode : Air or Cable mode are available.
3. Auto tune : Searches for usable stations and stores them in memory.
4. Skip : ON - Skip weak channels. OFF - No channel skip.
5. Fine tune : The frequency changes to allow fine tuning.
6. AFC : Auto frequency control.
7. MTS : Select the Mono sound/Stereo sound/Secondary Audio Program (SAP).
21
TV SETUP
MTS (Multi-channel Television Sound) SETTING
This feature allows reception of sound other than the main audio for the program.
1. Press the MENU button.
2. Use or button to select the TV setting menu, then press or button.
3. Use or button to select MTS menu, and press or button to select the
options (Mono, Stereo, SAP)
4. To exit the MAIN MENU and return to the normal screen, press the EXIT button
on remote control.
Note:
• MTS only operates while in TV mode.
• The SAP (Secondary Audio Programs) feature allows a TV station to broadcast
other information, which could be audio in another language.
RESTORE SETTING
If you reset the TV to the factory settings, all your present settings on picture &
sound will be erased and replaced by the factory’s default settings. However, picture
setting in PC mode and parental setting will not be erased.

The retuning process is as follows:

1. Press the [i+] button on the remote control to display the DIGITAL INFO menu.
2. Press the BLUE button to display the MAIN MENU.
3. Press the UP or DOWN buttons to highlight AUTO TUNING then press the OK button to display the AUTO TUNING MENU.
4. Press the RED button to start the auto tuning process for all available digital channels.
5. Wait for the process to complete.

If toy wish to CANCEL the auto tuning process whilst it is processing then press the BLUE button at any time.

You must get a proper replacement remote control, once you can access the menu and find you cannot store above 13, place another post and i will help you further.