Question about eMachines T5274 Desktop PC

2 Answers

Optiarc dvd rw ad-7561a ata device

I can`t use my device... it say´s code 10 and I have Windows viSTa... please help me!!!!!!!!!!!!!

Posted by luzca_89 on

  • Tim Yates May 11, 2010

    Try to role back drivers if possible, reinstall them from device website, code 10 could mean a lot of things but most likely software related

×

Ad

2 Answers

Anonymous

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Had the same issue and was able to resolve it by going to HP Compaq's websibe (for you it would be eMachine) and they provided the following information & i uninstalled the driver in device manager after running the below fix, scan the system for new hardware and the DVD drive appeared with the correct driver. hope this helps. good luck.

------------------------------------------
To resolve this issue, remove upper and lower limits from the registry. Upper and lower limits are points of your computer's registry that control the drivers for your specific device—in this case, the optical drive. Remove upper and lower limits from the registry using the Microsoft Fix this problem link below: optiarc dvd rw ad-7561a ata device - c01733077.jpg If Microsoft's automatic fix does not resolve the issue, try using the other methods listed in this document to troubleshoot the issue.

Posted on Sep 10, 2009

Ad

Michael Galve

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,269 Answers

Hi!

The code 10 error indicates a driver problem. To resolve this, try the steps below.

1.
Go to Device Manager (Control Panel > System > Device Manager) and uninstall the device driver first. Please reboot the computer. Windows should automatically install the best driver for your device.

2.
If you still have the same error message, you must install the specific driver for your device. It can be found on the CD that came with it. Run the setup CD of your device and follow the instructions during the Setup Wizard.

3.
You can manually install the driver. Go to Device Manager again, look for Disk Drives. Right-click your device with the Code 10 problem then click on Update Driver/Software. Then choose specifically the driver for Vista which you can find/browse on the CD.

If you don't have the Setup CD that came with it, you can download the driver HERE

Posted on Jul 16, 2009

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a biostar motherboard G31-M7TE with XP the instalation disk installs USB 2.0 ok, but now i installed Vista and planning Windows 7 too , but actually with Vista my USB is 1.0, too slow, it...


Access the Windows DEVICE MANAGER.
Select the USB hardware.
Click UPDATE DRIVER, and see if Windows Update can download and provide the correct device-driver to enable USB 2.0 support on your USB 2.0 ports.

Or, try: http://www.biostar.com.tw and see if the updated USB device-driver is posted on their "Support

May 19, 2010 | Biostar G31-M7 TE Motherboard

2 Answers

Changing from windows XP to Vista


If you are talking about Bernina artlink software here is a patch, but you nbeed to register. Check it out

Feb 25, 2008 | Bernina Artista 180

1 Answer

I am running windows 7 (upgraded from Vista which came on the machine at purchase). My dvd drive stopped working suddenly and it won't allow me to reinstall the driver. (hl-dt-st dvdram gsa-t20n ata device...


The Code 10 error code is generated when Device Manager has insufficient information or the error that is bubbled up by the device drivers is not recognized by Device Manager. Additionally, this error may occur when one of the drivers that the device needs does not start.
The Code 10 error pertains mainly to hardware and device driver issues or to compatibility issues.
Did you try Windows Update? You need to configure it so it looks for drivers as well.(is not by default).
It's strange since most drivers for Vista will work for Windows 7.
Another thing you can do is update and uninstall the driver, and restarting... that should take of it. I hope this helps. Please let us know if you solved the problem and do not forget to rate and provide positive feedback for our fast-free support today. Thank you :D

May 03, 2010 | Microsoft Computers & Internet

8 Answers

VOIP 321 will not work with Windows 7


VOIP 321 is working with windows 7. Install the Vista Software. After that you change compatility under properties (right mouse klick) to windws vista and it works fine regards kurt

Sep 08, 2009 | Philips DECT VOIP-321 cordless telephone

1 Answer

Recognizing Sansa e250 on windows vista


Code 10 solution - uninstall all of your Sansa hardware completely, and then reinstall it

Jun 22, 2008 | SanDisk Sansa e250 MP3 Player

1 Answer

Usb problem


Please do the recovery options which help u to have the old setups.

Jun 19, 2008 | Microsoft Windows Vista Ultimate Edition

1 Answer

The device cannot start. (code 10)


Msoft forum answer http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=1912325&SiteID=1

Also check you have all updates for your Windows system (Vista I am guessing) as well as Windows Media Player.

Mar 14, 2008 | Computers & Internet

2 Answers

Printer Setup & Support Call 1-805-225-6690 We will Help to Fix issue


Not sure if you've done this already or not, but I would suggest installing the printer manually as a local printer, and create a TCP/IP port that points at the IP of the Printer. Rudimentary way to go, but should help.

-Backu

Jan 16, 2008 | SonicWALL Total Secure 25 VPN Gateway, WL...

9 Answers

Chicony driver


THE DRIVER FOR THE CAMERA IS NOT TO BE FOUND. PLEASE LET ME HAVE THE DRIVER SUITABLE FOR WINDOWS VISTA.

Oct 04, 2007 | Chicony TwinkleCam DC2110 Webcam

Not finding what you are looking for?
eMachines T5274 Desktop PC Logo

3,575 people viewed this question

Ask a Question

Usually answered in minutes!

Top eMachines Computers & Internet Experts

Lee Hodgson
Lee Hodgson

Level 3 Expert

4810 Answers

efs_perpends
efs_perpends

Level 3 Expert

1997 Answers

Michael Thomas
Michael Thomas

Level 3 Expert

3053 Answers

Are you an eMachines Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...