Question about Poulan Pro Chain Saw 46cc 20"

4 Answers

Gas line diagram for poulan 2050 2.0 CI '97 Pioneer , lines dry rotted, I'm trying to replace them.

Posted by karthart on

Ad

4 Answers

Anonymous

  • Level 1:

    An expert who has achieved level 1.

    Governor:

    An expert whose answer got voted for 20 times.

    New Friend:

    An expert that has 1 follower.

    Corporal:

    An expert that has over 10 points.

  • Contributor
  • 1 Answer

Gas line diagram for poulan 2050 .



gas line diagram for poulan 2050 2.0 CI '97 - 4ceb173.jpg

Posted on Oct 25, 2009

Ad

dontbother10

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,220 Answers

Rkdian is correct; your saw won't operate properly if done as the others suggest.
Fuel Line Replacement by SmallEng.com
http://www.youtube.com/watch?v=JrXpU70Hmi0

  • The filtered hose from the fuel tank connects directly to the carburetor input connection.
  • If the saw is equipped with a primer, the output line from the carburetor connects to the suction side of the primer bulb (once bulb is collapsed it draws fuel from the tank through the carburetor to refill the bulb as the bulb refills).
  • The pressure side of the primer returns any excess fuel to the tank as it is depressed.
HTH
Lou

Posted on Oct 25, 2009

Ad

Anonymous

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Small line runs from the bulb to tank with filter on end. Back of bulb is marked tank carb at each fitting. Run the other line on carb to hole fitting on rt side of the tank.

Posted on Jul 29, 2009

Anonymous

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 76 Answers

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

GAS line diagram for Poulan 2050 Chain saw


The gas line goes from the gas tank to the carburetor and probably passes through the underside of the handle. The correct diameter hose is very important as it is used to form a compression seal with the gas tank using a coupling that connects to the siphon filter with a short length of tubing.

Feb 21, 2015 | Poulan Wild Thing 2375 18" Gas Chain Saw...

1 Answer

How do ireplace gas filter in poulan 2055 chain saw?


the fuel line rots apart you need to replace the line pull the old hose out take a new hose cut down about a half inch cutting the line to about 1/3 slide a stiff wire down the hole and out the gas cap slide the hose over the wire and slide it back til the cut back end pops out put the filter on the end and pull it into place cut to size and install on the carb

Sep 01, 2012 | Poulan 2050 2055 2975 2150 2155 2175 Air...

1 Answer

Diagram of fuel lines from tank to primer to carb and back to tank for a poulan 2050 chainsaw.


clip_image002.gifFuel components are onthe "Engine Assembly" & "Handle, Chassis, & BarAssembly" detail pages.
Replacement fuel lines can be found at yourlocal chainsaw seller/mechanic. They are different diameters.

Fuel Line Replacement
  • The hose in the tank with the filter on the free end connects directly to the carburetor input connection.
  • If the saw is equipped with a primer bulb, the output line from the carburetor connects to the suction side of the primer (once the bulb is collapsed it draws fuel from the tank through the carburetor to refill the bulb as it inflates).
  • The pressure side of the primer returns displaced fuel to the tank as it is depressed.
2_3_2012_12_23_25_pm.gif

Feb 21, 2011 | Poulan P3314 14" Gas Chain Saw 2.0 Cuin...

2 Answers

I have an 18" Poulan chain saw, 25th Anniversary


Yes there is.If you can get the broken pieces out of the tank.there should be a filter on one of the broken lines.you will have too buy some gas line 3/16.take some wd-40 and spray the line.this makes it easier to slide through the hole in tank.then loop it around to gas cap hole and reinstall filter.then make sure filter is at bottom of tank and hook back to carb.

Nov 24, 2010 | Poulan P4018WT Wild Thing 18Inch 40cc...

2 Answers

Replacing gas line


Your fuel lines are routed like the schematic below. I suggest you replace the filter, all hoses (2 different sizes), and the purge button (bleeder).
http://www.fixya.com/support/r3706813-2_cycle_fuel_system_repair

May 07, 2010 | Poulan ES350 16" Chain Saw

1 Answer

Installing fuel lines for, poulan 2150 16''


Find the model of your saw and open the IPL and handle assembly drawing here:
Poulan.com
http://www.ordertree.com/modelinfo/POULAN-WEED-EATER/75.59.html
This is as good as fuel routing gets!!! If this isn't sufficient Find your nearest Poulan repair facility or try your friendly neighborhood chainsaw seller/mechanic. Resubmitting this question won't get any better answer. HTH
Lou

Sep 14, 2009 | Poulan Garden

Not finding what you are looking for?
Poulan Pro Chain Saw 46cc 20" Logo

12,296 people viewed this question

Ask a Question

Usually answered in minutes!

Top Poulan Garden Experts

dannydoesita

Level 3 Expert

777 Answers

Marvin
Marvin

Level 3 Expert

85239 Answers

bryan st

Level 2 Expert

123 Answers

Are you a Poulan Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...