Part 8169394 oven door replacement came with NO instructions

Visit http://www.managemyhome.com and click the "Manuals" link near the top center, enter your full model number from the tag on or in the oven and you should find it for download.
A full Sears/Kenmore model number has 3 digits, a dot, then 8 more digits, such as ###.########

If the model number is correct, the lock can be turned on/off by pressing and holding the CLEAR/OFF button for about 3 seconds. These instructions are listed on page 28 of the owner's manual.


If you no longer have an owner's manual, you can obtain a replacement copy at managemyhome.com. Just enter your model number under their "Manuals" link and you will find your owner's and installation manuals available in .pdf (Adobe) format that you can download or print for FREE. If you need further assistance, please post back and let me know. I hope you find this information helpful.

managemyhome.com happy Thanksgiving.

If you require an Owner's Manual, you can find one at managemyhome.com. Just type in the model number that you have this question listed under, in the "Manuals" link. and the owner's manual is available in a .pdf (adobe) format that you can download or print for FREE.

Included are the operating instructions, installation instructions, use and care instructions and specifications.

I hope this is what you were looking for.

Go to managemyhome.com and type your model number under the "Manuals" link. You owner's manual is available in a .pdf (Adobe) format that you can download or print for FREE. I hope this helps you.

Go to Managemyhome.com and enter your model number under the "Manuals" link. Both, the installation manual and operator's manual are available in .pdf (Adobe) format. You can download a copy or print them out for FREE. I hope this helps you.

http://www.managemyhome.com/

http://www.managemyhome.com/mmh/lis_pdf/OWNM/L0411402.pdf
I could only find the owners manual. Hope this helps.

On page 8 of the installation manual I found, it shows that the oven can be vented to the outside. You can view it at this link:

http://www.managemyhome.com/mmh/lis_pdf/INSTL/L0707162.pdf

If the link does not work, you can go to managemyhome.com and type in your model number under the "Manuals" link.

In the manual it describes three methods of venting: Room, Roof, and Wall. It also gives guidance on how to properly install the duct work.

If you have questions, please let me know. I hope this helps you.

The door should simply come off by opening it all to way and lifting straight up at the hinges, The door will lift off the hinge pins. On some models you may have to remove the upper grill above the door (if equipped). If you still have questions, please let me know. I hope this helps you.