I need a replacement bowl with the lid - Euro-Pro EP91 Quad-Blade Food Processor

I would agree with the first poster about checking the lid interlock, other causes are bad motor or bad start/stop switch associated control board, first use your nose and smell near the bottom of the unit does it smell burnt like an old dusty space heater, this is a good indication the motor windings are bad, I would suggest you replace the entire machine as sone motors cost the price of a new one, however if nothing is burnt smelling and the lid is on then your control boad is the next possible culprit, depending on model they range from $45-$80.

This tip is used to remove a stuck bowl from the base of a Kitchen Aid tilt-head mixer. It might work for your situation. Fill the bowl with very hot water (use the food shoot as a pour spout). Now use either frozen gel packs, or a bag of ice cubes, and lay the ice on top of the lid. Wait for a few minutes. The hot water with make bowl expand, ice will make lid shrink, thus loosening the tight lid. I'm assuming that the lid edge fits inside of the bowl, like most food processors do. Try to gently move the lid, and see if it'll give.

Google Food Processor parts. You'll see many sources to choose from.

You need to replace either the bowl or the lid. Either the lid is not pushing the bowl mechanisms far enough or there is too much lost movement in the bowl part.

Hi,
yes there is... replacement bowls can be found on amazon, here: Finally charging for our multi device world. I hope this helped. Regards
Ned

Did you find a lid? I have a used one and would gladly send it to you for the cost of shipping from NH.
I warped the bowl for mine in the dishwasher and have since replaced it with a new food processor so would be happy to give away the useful parts (lid, pusher, blade, discs & carrier).

the bowl is part number
MP12-2-200

call 1-866-925-PART
still tracking down lid

Cuisinart DCL-7 replacement work bowl lid is cuisinart dlc-017bgtx work bowl lid fitting with large feed tube.

Try this site for the parts. If I have model # I might be able to help more.

http://www.householdappliance.com/food_processor_parts.html

Good Luck and Please Rate FixYa!

Generally they twist off, but on the DLC-2, if the lid won't come off, a replacement bowl and lid is around $18.00