Where is spark plug located on Squall 2100, 4 cycle,208cc ohv?

copy and paste this address into your browser's address window http://www.troybilt.com/equipment/troybilt/squall--2100-snow-thrower and click on support and download your manual containing the info you need

Hi Mickel
Here's a link with diagrams that identify all of the parts and locations.
http://www.ereplacementparts.com/poulan-2100-gas-chainsaw-parts-c-16962_17147_17213.html
Cheers

go to troy blit and input model number, this will tell you what you need to know

It sounds like the carb needs cleaning and readjusting, or the fuel filter is clogged. Good-Day! Remove and clean out carb, it may be dirty inside.

You need to remove the lower panel to access the engine. In the engine blow-out, the oil drain plug is numbered 77 (bottom of the crank case).

208 cc = 8 to 9 Gross Torque = 5.5 to 6 hp



The following article has a fairly good explanation of how to convert but as the writers writes there a lot other variables that are not account for the conversion.



cc to torque to hp Conversion Update

-You have to shift to Neutral before it can roll free.


Good luck

Mai

Clean carbon on the spark plug

Change the coil at the magneto that generates the high voltage to the spark plug

Is the gas making it TO the new plug? Pull it over a dozen or so times on full choke and then pull the uh to see if its wet meaning the engine is getting fuel. Also make sure the safeties and off switches aren't preventing it from starting