Is there a fix for my lights flickering on my 07 dodge 3500 6.7 I have try just about every thing I can with out taking it in to be looked at

Have you checked for any codes in the ECM ?

You may have a bad neutral safety switch

Some Chrysler ,Jeep and Dodge vehicles have ttye pressure sensors calibrated to the vevicle,so therefore if you change the
tyres to a different type you will need to take your vehicle to a C.J.D.
service department to have the computer of your car re-programmed to accept the new tyres

Check bulb, socket and ground. If that's not it, could be bad multipurpose switch.

6 7 cummins in 3500 dodge 07 belt change YouTube

work on one thing at a time, brake lights first, check the brake switch, is it mounted ok ? is power geting to it ? replace if any doubt. check all fuses, replace 4-way flasher, cheap fix . a repair manual has good info, including wire diagrams, for all circuits, etc.,,.. check wir harness @ rear of truck, & along frame for damage, corrosion, etc.,.

call your local auto parts store and see if they can read the codes for you most do not charge so look around

Doesnt look like they go that high.....??

Here's a list of all the codes

http://www.allpar.com/fix/computer-codes.html

you may have wired them to the daytime running light circuit

TRY TO SERVICE THE TRANS

take to a body shop theyll be able to get the hood opened and figure out why the oil light is flickering. please email me at [email protected] if you have anymore info or ?s