New battery, new solenoid.... turn key display lights come on but will not ignite. Do not get a click or anything.

not car moved you to ATV

Sounds like you have a weak battery, test the voltage. If battery is fine then your starter relay is the culprit. Clean all terminals in battery and relay, corrosion on the connectors will cause this too

So it does turn over or no it doesnt turnover.

Hey Brad
With the info you have provided, it seems to point to the ignition switch as the problem. (the clicking you should hear comes from the solenoid contacts - not the starter button). There is probably one wire in the switch that has broken or come unsoldered or other wise not making the right connection.

The ignition switch has problems. Its complex w alot of wires. A relay or fuse cud b factor tu

You need to try and find someone to try the manual start, just to rule out anything past the auto switch such as starter. If battery is new and solenoid is new then it's probably either the switch or could even be a fuse in the link.

the solenoid for the ignition and starter has failed. Also remember the brake has to be applied to activate the starter system.

Kawasaki mule 610 new battery but little to no power to solenoid. Fully charged starter makes rapid clicking noise. When attacked to battery jump starter it will start. Mule was running excellent for 2 weeks with new battery. I was told by kawasaki technician it was ignition. Nope thoroughly skimmed inspected wires and see nothing wrong. Technician told me different second time, it's now the starter replaced starter ($450) and still no results I'm at a loss

if neutral light is on green. Then it must be the starter motor Unless you are getting a rapid clicking, That is a bad battery.

My 400 has a brake switch interlock. Don't forget to check that function.