Question about Moultrie A-5 Game Camera

Open Question

Camera is set up but when it should be taking a photo, it starts count down again, every time.

Posted by Larry Clemmons on

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i set the timer on a canon a560 digital camera


On the back of the camera where the( Func. Set )button is located, there is a (Clock symbol/icon) below it, press that and you should see a display on your camera screen giving you how many seconds delay you want before it takes a photo. Choose the amount of seconds you want and press (Func. Set), now press the shutter button and you should hear a beep count down.

May 23, 2014 | Canon PowerShot A560 Digital Camera

3 Answers

Camera turns off when taking picture


Try changing the battery brand and see if this helps..I seem to have the same issue with my camera with certain battery brands..Solved my problem by switching brands..

Jun 21, 2008 | Fuji FinePix A345 Digital Camera

1 Answer

Canon EOS Rebel T2 - film loaded, but then wouldn't take a picture, the frame count was flashing on screen. What is the problem?


Hi. Open the camera back and pull the film further over towards the pick up spool, close the back and try again to take a photo, i had the same problem with an eos 650 and it always worked.Good luck.

Apr 15, 2014 | Canon EOS Rebel T2 with 28-90 lens 35mm...

1 Answer

How do I reset the photo/frame numbers?


I'm afraid your camera can't set the photo count to 1.
At least the user manual does not show any possible hint how it could be done.

Feb 13, 2014 | Kodak EasyShare C913 Digital Camera

1 Answer

I am not sure how to set the time interval in the nap mode. It starts at 2 hours, and I can't change it.


Ok, this is the way it works, and I keep my clock radio for this feature alone. It is a 2 hour "count down" timer. It is set in 15 minute intervals. Supposed you wanted to take a 1/2 hour nap. Press the button but don't let go. As you hold your finger down the timer will start at 2 hours (2.0) and it will then go to 1.45, etc. When you get to a 1/2 hour let go and it will start counting down. If, in the process, you make a mistake, press the blue button and don't let go. Hold it down until it erases the setting and removes the NAP text from the front display. Release button. Start holding down the button again. Once again, the display will go to two hours, continue to press button, it will start counting back in 15 minute increments. Again, when it gets to 1/2 hour, quickly let the button go. As the clock counts down, you cannot see how much time is left on the clock. Press the button, quickly let go again. It will display how much of the 1/2 is left. When the clock counts down to zero, either the alarm will sound or the radio will start playing depending on what you set the alarm to do. Press the off button, that's it... (0:

Sep 01, 2011 | RCA RP3721 Clock Radio

1 Answer

Pentax ist dl camera is working fine, but no matter what card I put in all the pictures are black and the card is not counting down all the time, starts at 400 and I'll take 20 photos and it will read 398...


Remove the lens and fire off a few shots while looking inside. Does the mirror seem to work ok? Is the shutter actually opening revealing the sensor?

Nov 23, 2010 | Cameras

1 Answer

How do I set the timer?


To set the timer, you simply need have the camera in ready mode (as if you were going to take a picture normally), then on the back where you have the four directional pad buttons, with the camera facing you press the left button once and you should see a circle with the number 10 in it. If not, press again. This is the timer for 10 seconds. If your press the left button again, you will see a circle with a 2 in it. This is the 2-second timer.

Now choose which one you want, the 10 or 2-second timer. Once you have decided, press the shutter button fully and you will start to hear beeping. This is the count down sound. Now depending on if you have the flash setting to go off, once the beeping and the self-time indicator on the front of the camera stops flashing, your picture has been taken.

To take another timed photo, you must repeat the same steps again.

Hope that helps.

Aug 04, 2009 | Panasonic Lumix DMC-LZ2 Digital Camera

1 Answer

Set the timer on my finepix f10 and it does not do anything?


Once the timer is set, then you need to press the button to take photo, once you do that the camera will count down and take the photo. Good luck.

Dec 04, 2008 | Fuji FinePix F10 Digital Camera

2 Answers

FOR flashes in the lower right corner of the display


You must hold the format buttons until it flashes FOR then release and press again to proceed with the formatting.

Jan 20, 2007 | Nikon D70s Digital Camera

Not finding what you are looking for?
Moultrie A-5 Game Camera Logo

Related Topics:

637 people viewed this question

Ask a Question

Usually answered in minutes!

Top Moultrie Video Cameras Experts

Brad Brown

Level 3 Expert

18455 Answers

Harrie

Level 3 Expert

6740 Answers

ray gallant

Level 3 Expert

70006 Answers

Are you a Moultrie Video Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...