- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Please visit www.quinny.com and select the country you're in, then choose the "Contact Us" tab for your enquiry about a replacement sun canopy to be sent to the relevant customer care team who can advise on costs and availability.
TO FOLD STROLLER • Close the canopy as described in the canopy section. Recline seat by releasing buckle as described in seatback positioning section. • The stroller is folded by simultaneously pulling each trigger fold. . When the fold latches are released, the handle will begin to fall toward the floor. Release the fold buttons and press downward on the stroller handle until the stroller is completely folded. Secure the stroller in the folded position by hooking the fold latch, located on the right side of the stroller, over the rivet that protrudes from the frame. CANOPY * The canopy features a ratchet system that allows the canopy to be moved forward to block the sun or wind. To adjust the canopy’s position, push forward or backward on the canopy until the canopy is in the desired position. See figure 23. SEATBACK POSITIONING * The seat has a multiple position recline that is controlled by a strap and buckle assembly behind the seat. . To recline the seat, loosen the strap through the buckle and adjust to the required recline position. To place the seat back in the upright position, press upward on the seat back with one hand while pulling the strap through the buckle with the other. The strap will lock automatically. http://www.babytrend.com/download/2007061021349109CT_instructions.pdf
The canopy should just push onto the seat frame, they do need a bit of pushing though. its easier if you get the connector half on and then just push, will hear a popping sound. it took me a while to figure it out on mine and the instructions aren't the best.
×