Question about Kenmore Freezer 20.3 cu. ft. Frost Free Upright Freezer
Need to know how to reset touch panel to change the temperature from centigrade to Farenhiet I need to learn how to operate the touch panel in order to change the temperature from centigrade to Farenhiet.
is it possible the door has not been closed at some point?
If so they can build up with ice in the evaporator which the defrost system cannot handle....Try a manual defrost.
Depending on where the unit is installed high ambient temperature can drop the internal temp enough to set the alarm off though they will still freeze sufficiently
Posted on Jan 06, 2008
simple stuff, you have a compressor a stat and power. check the receptacle to be sure you have 120 volts . then check the compressor with stat at max cold setting to see if you have 120 volts at compressor. if you do then compresssor is bad =new compressor or new unit. if no power to compressor then stat is bad= new stat. i always recomend new unit cause new stat or compressor wont fix a freon leak.... i have replaced a few compressors that died soon after due to a freon leak. good luck...
Posted on Nov 27, 2008
It sounds like the unit is low on freon or the compressor is going bad. You have several other components that could be affecting this as well. Make sure the coils are free from dust and clean underneath. This is a bit premature for you to have problems now, especially since it is a Sears product.
Posted on Feb 17, 2009
Tips for a great answer:
Feb 03, 2016 | Freezers
Feb 27, 2015 | GE Profile Spacemaker Stainless Steel...
Nov 15, 2014 | Kenmore Freezers
Aug 26, 2014 | Zanussi Freezers
Nov 04, 2013 | GE FUF14SVRWW Upright Freezer
Oct 27, 2013 | AEG Freezers
Dec 14, 2010 | Woods Freezers
Aug 10, 2010 | Traulsen Reach in Freezer - G22010
May 04, 2009 | Freezers
Nov 20, 2007 | Freezers
147 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: