I have a flashing menu screen and cant turn it off

Try this
1. Press and hold the MENU button
2. Turn the volume to select DEMO and press the volume to enter the sub menu.
3. Turn the volume to select DEMO OFF and press the volume to set.
4. Press MENU to exit.

http://www.scribd.com/doc/3577881/Memorex-MT2206-TV-Service-Manual
use this service and repair manual to sort out your issue.

Try booting from a Flash

Please replace inverter board

You most definately have bad capacitors in the power supply. try and get it repaired as soon as possible, not an expensive repair that iv'e seen.

The button that looks like a curved arrow will let you go to a previous menu screen - see your user's manual for details.

-Tha Mp3 Doctor

Hello!
to activate the flash...
restart your psp
until it is fully off, turn it on and hold the right tab button
the m33 recovery menu appeared...
go to registry hacks
and activate the the flash...
press triangle and x
and exit/close the recovery menu...

perhaps the volume down button on the TV is stuck. It could be either physically stuck, or the electronic logic could be messed up. Just to rule out a problem with the remote, take the batteries out of it and then adjust the volume at the TV and see what happens.

When I turn on my TV it goes straight to the menu screen. You can still hear sound but no picture. When I try to exit you see the picture for about a second then it automatically flashes back to the menu screen. Even if I try to use the functions in the menu screen it flashes right back to the main menu screen. Very frustrated...need help!

This camera has four flash modes and each time you press the button the mode changes. As you press the button you should see the indictor in the upper left side of the screen.
1. In automatic flash, the camera will decide if you need flash or not. This mode does not have any indicator on the screen
2. Forced flash, this will cause the flash to be constantly on. The indicator looks (kind of) like a lightning bolt.
3. Slow Syncro, this mode slightly delays the flash and is used to lighten up the background more the foreground. The indicator looks like the lightning bolt with SL next to it.
4. No flash, this will turn off the flash. The indicator looks like a lightning bolt enclosed by a circle with a diagonal line through the lightning bolt. (similar to a no parking sign).
If you don’t see the indictor changing on the screen the switch behind the button is malfunctioning.