I downloaded a Linux program from the Internet to my download directory. How can I install it?

Go to the small blue arrow in the upper right of Firefox, and click it. Then double click the file name.

Certain Firefox problems can be solved by performing a Clean reinstall. (XPCOM problems require a reinstall) This means you remove Firefox program files (not any bookmarks etc. in your profile folder) and then reinstall Firefox. Please follow these steps:
Note: You might want to print these steps or view them in another browser.

1. Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
2. After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu).
3. Delete the Firefox installation folder, which is located in one of these locations, by default:
   • Windows:
     • C:\Program Files\Mozilla Firefox
     • C:\Program Files (x86)\Mozilla Firefox
   • Mac: Delete Firefox from the Applications folder.
   • Linux: If you installed Firefox with the distro-based package manager, you should use the same way to uninstall it - see Install Firefox on Linux. If you downloaded and installed the binary package from the Firefox download page, simply remove the folder firefox in your home directory.
4. Now, go ahead and reinstall Firefox:
   1. Double-click the downloaded installation file and go through the steps of the installation wizard.
   2. Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.

Odd, never saw that error before. You might try using Revo Uninstaller (free download) to remove all traces of your old TOR browser on Windows. If on Linux, just delete the old TOR browser.

Why not just follow instructions and create the new directory? I think traces of your old TOR browser are causing this error.

You can remove or change the Window's User or administrator's password and privileges. You need access to a computer with Internet access to download the Hiren's Boot CD and burn it onto a CD. Then insert this CD into the laptop/computer and boot up the laptop/computer with the Hiren's CD and follow the instructions. There are very useful utilities CD and it a Linux boot CD which contains quite a lot of Utility programs including a password removal program. Click on one of these links to download HIREN'S BOOTCD :- http://www.hirensbootcd.net/ http://67.20.82.163/

a good place for information about printers and linux is OpenPrinting

OpenPrinting database - Printer: Epson Stylus T11 S20 T20 T20E T23 T26 T10

some good advice there:

OR ............

Epson make linux drivers

go here

Inkjet Printers ' AVASYS CORPORATION

you will find one for your T10;

you will need the rpm version; and you will need to read the instructions; many companies offer two rpm files: a general one, installed first, and then a specific for the printer

you can graphically install by right-clicking on the downloaded file, and select install by YaST

or terminal

change directories so you are "in" the directory the downloaded files are in:

cd downloads(assuming you download downloads into downloads ......

lsjust lists all the files you have

suto assume root powers

rpm -Uvhwhatsafile.rpm

In Case You Still Having Problem Then Follow Us For On : Epson Printer Support

Before you start Please make a note of this page: How To Recover
If you are unfamiliar with basic Linux command usage, you should visit this page: Basic Linux Use
Disclaimer Enacting any set of instructions from this site has the (remote, but greater than zero) potential to void your warranty. Our intention and the specific design of all instructions is such that you should be able to recover using the webOS Doctor should anything go wrong, and put your Pre back to a state which is indistinguishable from a factory-new Pre, but we give no guarantee. Use any information from this site at your own risk. At the very least, you should be prepared to lose all data on your phone at any time. We cannot tell you what you should do - we provide the information, but it's up to your own sense of personal responsibility to determine what you do with that information. We require you to use the webOS Doctor to put your Pre back to factory condition before contacting Palm or your cellular carrier for service or support.
You might also want to consider backing up any files you have in the usb drive portion of the Pre.

In general, simply installing the Palm SDK gives you everything you need for full access to the Linux operating system on the Pre or Pixi. There is no special "rooting" or "jailbreaking" process. Simply installing the SDK provides you with unlimited access to the Linux operating system logged in as the root user. Palm does not see this as a bad thing. Palm provides all these tools for download by anyone, anytime, for free.

1. Download the Palm SDK.
2. Install it using the installation instructions for Mac, Linux, or Windows.
3. Enable dev mode on your Pre:
   1. In Card view or in the Launcher application, type the following: webos20090606
   2. Tap the resulting Developer Mode Enabler icon.
   3. In the application, move the Developer Mode slider to the On position.
   4. Tap Reset the Device .
      • When reset is complete, Developer mode is enabled.
4. Plug the device into the computer via the USB cable, and select "Charge only."
5. The next step varies:
   • On Mac or Linux, type novaterm in a command (terminal) window to directly access the Linux command line.
   • On Windows you will need to download and install a novaterm program.
     • On 32 bit Windows download novaterm1.zip and unzip it into the \program files\palm\sdk\bin directory.
     • On 64 bit Windows download novaterm64.zip and unzip it into the \program files\palm\sdk\bin directory.
     • Then, just like the Mac and Linux users you can just type novaterm.

At this point you will have a window with a prompt that says root@webos-device: or something similar.
You are now logged in as root on your webOS device and can do anything you would normally do on a Linux device.
Please be careful, you can seriously bork your phone now.
IMPORTANT NOTE: With the addition of the ability to install Optware packages to Preware, unless you have a need or desire to type commands into the native Linux shell of your Palm device, there is no need to use the novaterm terminal to log into your devices. Webos Quick Install (a java program for your desktop) and Preware (an app to run on your device) are fully capable of installing any Optware IPK (including *.patch and *.diff) to Palm devices. Linux command line access is needed by very few people. If you came here from a web page that talked about "root access" or "rooting your Pre" be aware that most of the instructions which require root access have been

*then ur o.s is not registered it seems

*uninstall and try again

Hi

Check Intel PRO/Wireless 2200BG Downloads - http://downloadcenter.intel.com/Product_Filter.aspx?ProductID=1637
Select Linux from and click on go
You can download Intel PRO/Wireless 2200BG version 1.2.0 or 1.1.0

Installing/updating Intel PRO/Wireless version 1.2.0 driver for Linux
- To extract the archive file, type from a console: tar xzvf ipw2200_linux_1_2_0.tgz
- To install the driver the following is needed:
1. Linux with a 2.6.8+ kernel. See README.ipw2200 for information on
specific options required to be enabled in the kernel.
2. Wireless Extensions (v16) and Tools (v27-pre23) if not included in
your distribution
3. The driver (ipw2200-1.2.0.tgz)
4. The binary firmware image (ipw2200-fw-3.0.tgz)
5. For instructions on how to build and use the driver, please see the INSTALL document in the ./intel_ipw2200_120/ directory.

More info http://ipw2200.sourceforge.net

Regards
Mike