Question about Exercise & Fitness

1 Answer

Error code message

It comes up with error code AC-6 please help

Posted by mellinda carr on

Ad

1 Answer

Claude Kayser

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Master
  • 9,098 Answers

What Does Your Treadmill's Error Code Mean? - LifeSpan

www.lifespanfitness.com/.../what-does-your-treadmills-error-code-mean

Free
May 21, 2015 - If the running belt stops after 6 seconds of starting the treadmill, this may indicate that either the ... If there is no belt movement, or you notice a burning smell coming from the motor area, this ... An E6 or E7 error code is an incline error code. ... This will cause the incline motor to raise the running deck up.

[PDF]ERROR CODES: ADDITIONAL ERROR CODES:

www.gympart.com/TSB/.../Treadmills/.../Sportsart%20Error%20Codes.p...
ERROR 6: INCLINE ERROR - CHECK INCLINE OPERATION AND CALIBRATION. ERROR ... ERROR 1-1: AC SERVO ERROR - AC SERVO MOTOR ENCODER HAS FAILED ... error codes listed by category: treadmills, bikes, elliptical trainers. ...ERR1 Condition 1: Press speed key; walk belt doesn't move; ERR1 appears.

[PDF]Error Code Troubleshooting Guide


Posted on Jan 19, 2016

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
2answers

E1 Error code on Carrier AC model 42LUV080H.

codes should be listed on inside door panel of unit
0helpful
1answer

Error code AC-6

ERROR CODES: ADDITIONAL ERROR CODES:

www.gympart.com/TSB/.../Treadmills/.../Sportsart%20Error%20Codes.p...
ERROR 6: INCLINE ERROR - CHECK INCLINE OPERATION AND CALIBRATION ...ERROR 1-2: AC SERVO ERROR - MOTOR IS OVERHEATING (SPEED RESTRICTED ... error codes listed by category: treadmills, bikes, elliptical trainers.

[PDF]Precor Error Codes


2helpful
2answers

I have a samsung split system it's just shows error 6 and dosen't work .. It's the perpendicular style.. Please answer my question ...

Fault code. 6. From what I have read 1 of 2 items. The unit has completely lost freon charge. Or 2, outdoor has overheating problem, ie. condenser fan motor not running
1helpful
1answer

Treadmil t733 shows E9 error and soes not start

Dear Sir:

Hello I hope you are o.k

I wil give some tipoe with this Error code:
Error 09 - Lower PCA Memory Test Errors
Description
Error 09 checks lower PCA memory locations during the power up test sequence. If a fault is
found during the power up test sequence, error 09 will be displayed. This error code is only used
on products utilizing the dual microprocessor system.
Possible Causes
1. This error message almost always indicates a lower PCA problem when it is consistently
displayed. Failures causing this error message to be displayed are rare.
Possible Remedies
1. If the error message is consistently displayed when the unit is powered up, the lower PCA
should be replaced. It is possible to see this error message displayed intermittently due to
external causes. If the units A.C. input significantly dips during the power up test sequence
the test could fail resulting in this message being displayed. Treadmills operating on
non-dedicated A.C. circuits may see this message displayed on an intermittent basis.

Thank you in advance, sincerely. Blessing.

If you need additional Help, please reach me.

E.CUADRA
Managua, Nicaragua. C.A.
0helpful
1answer

It does not start and shows E9 error

Dear Sir:
I hope you are o.k

I will help you:
Please follow this step:
Error 09 - Lower PCA Memory Test Errors
Description
Error 09 checks lower PCA memory locations during the power up test sequence. If a fault is
found during the power up test sequence, error 09 will be displayed. This error code is only used
on products utilizing the dual microprocessor system.
Possible Causes
1. This error message almost always indicates a lower PCA problem when it is consistently
displayed. Failures causing this error message to be displayed are rare.
Possible Remedies
1. If the error message is consistently displayed when the unit is powered up, the lower PCA
should be replaced. It is possible to see this error message displayed intermittently due to
external causes. If the units A.C. input significantly dips during the power up test sequence
the test could fail resulting in this message being displayed. Treadmills operating on
non-dedicated A.C. circuits may see this message displayed on an intermittent basis.

Thank you in advance, sincerely. Blessing.

If you need additional Help , please reach me.

E.CUADRA
MANAGUA, NICARAGUA. C.A.
0helpful
2answers

When I started my DELL Inspiron 1525 running Win 7 Ultimate, I got a white-on-black screen which questioned the voltage from power adapter. Diagnostic program run.. Stopped with the following msg: Error...

2000-0142 and 2000-0146 are hard drive SMART errors, indicating the HDD will fail.
To boot message about the AC adapter was a BIOS level message that normally appears when a Auto/air ac adapter or other 65 watt ac adapter is used to power the system.
3helpful
1answer

Code 3514 keeps coming one

Error: "Rear access door open" (3514)
How do I resolve the error message "Rear access door open" (error code 3514)
To clear the "Rear access door open" error message:
  1. Remove the rear access door from the printer.
  2. Reinstall the rear access door on the printer and verify that both latches are securely engaged.
  3. Unplug the AC adapter from the printer.
  4. Plug the AC adapter back into the printer.
  5. Wait for the printer to initialize.
  6. Verify that the error has cleared.
117helpful
6answers

HP 1005 Scanner error 6

dear Sirs i have HP 1005 did't work and have this message Scanner Scanner error 6

please if you can help me
1helpful
1answer

E1 error code

my AC is going on 5-6 years, it's never failed me until the years. The Error E1 code hes been coming on lately.
i wait a few MIN's, then try again. about the 7-10 tries the unit comes on.

1. what is a error code 1

please reply to:

Derrick holiday
Email.... [email protected]

thank you.
dh
Not finding what you are looking for?

Open Questions:

Exercise & Fitness Logo

Related Topics:

978 views

Ask a Question

Usually answered in minutes!

Top Exercise & Fitness Experts

Sportsmith LLC
Sportsmith LLC

Level 3 Expert

919 Answers

Tom Chichester

Level 3 Expert

62180 Answers

ray gallant

Level 3 Expert

73532 Answers

Are you an Exercise and Fitnes Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...