SOURCE: error message
hi silv
just seen this post , if still getting trouble with the printer you can try here - PIXMA MP500 -
type in the ? for results.
riz.
SOURCE: Canon D880 Printer/Fax
1. Take off 3 plastic covers one above exit area-slide top to left to access screw
remove lower exit cover and side cover -unsnaps with 2 pins and there is one more cover I think over the fan that needs to come off.
2.Locate black plastic sheet covering a circuit board carefully pull this back-disconnect 3 plastic connectors that lead from the heater to the circuit board
3. using a offset phillips #2 screwdriver remove 3 screws that hold the fuser to the frame. carefully lift fuser up and out toward the exit area.
4. pop off black cover remove 2 screws from top of fuser, disengage cover lid locks with a small screwdriver, lift upper fuser heater-be careful NOT to damage
plastic heater membrane. remove paper jam and reassemble.
SOURCE: D880 Imageclass - paper jam - accordioned in
the jam is in the fuser assembly. you will have to have a technician fix this. the fuser will probably need to be replaced.
218 views
Usually answered in minutes!
×