Question about Comfort Zone CZ1500WC Infra-Red Utility/Portable Heater

A05 on screen. Will not let me change temperature. Will not come on.

1 Answer

archie

Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.
Contributor
1 Answer

Turn on heater ao5 comes on hit temp switch clicks but goes back and forth from ao5 to temp degree is it the printed circuit board please email at [email protected]

Posted on Jan 11, 2017

Add Your Answer

Upload

Upload an image from your computer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

Loading...

Include an image. It's worth a thousand words.

prev next

Related Questions:

1 Answer

What is the A05 message mean?

A05 overheat condition, you must clean thoroughly,
press the helpful button

Jan 30, 2016 | RTO Comfort Zone Electric Portable Space...

1 Answer

I need hepl to error A05-303 , Riso 230

A05-303 Master disposal error - clean master trash bin and check to see if sensor lever in master disposal path is pushed back

May 30, 2015 | Office Equipment & Supplies

2 Answers

I have a code A05. What does that mean?

Hold the two buttons on right with power on to reset.

Dec 19, 2012 | Comfort Zone CZ1500WC Infra-Red...

1 Answer

Describe your LG k170 signal problem Problem

Instructions

jQuery(document).ready(function(){ jQuery('#jsArticleStep1 span.image a:first').attr('href','http://i.ehow.com/images/a05/k7/ln/troubleshoot-_a-home-network-1.1-800X800.jpg'); }); Make sure you have run the Network Setup Wizard on each of your computers, even if you have configured it manually. Your file and printer sharing are disabled until you run the wizard at least once.
jQuery(document).ready(function(){ jQuery('#jsArticleStep2 span.image a:first').attr('href','http://i.ehow.com/images/a05/k7/ln/troubleshoot-_a-home-network-1.2-800X800.jpg'); }); If the problem is that some of your computers appear in My Network Places or View Work group Computers, while others do not, wait about 20 minutes or so and then check again. If all computers still do not appear, and you have older versions of Windows running, like Windows 9x or Me on your network, restart the Windows XP computers, wait for about 3 to 4 minutes then start up your older computers. Wait for a few minutes then check again. If that does not work try booting your computers in various orders.
jQuery(document).ready(function(){ jQuery('#jsArticleStep3 span.image a:first').attr('href','http://i.ehow.com/images/a05/k7/ln/troubleshoot-_a-home-network-1.3-800X800.jpg'); }); On each of your computers, click Start, My Computer, select My Network Places, and then select View Network Connections Look for the Local Area Network Icon. See if the Icon says "disconnected". If the answer is yes then you have a problem with your cables or your network adapter. Repair before proceeding.
jQuery(document).ready(function(){ jQuery('#jsArticleStep4 span.image a:first').attr('href','http://i.ehow.com/images/a05/k7/ln/troubleshoot-_a-home-network-1.4-800X800.jpg'); }); Now, look to see if any of your Local Area Connection Icons say "Firewalled" next to them. If you find this problem then Your Windows Connection Firewall might be blocking printer and file sharing on that computer. Go to your Firewall Protection and make the needed changes.
jQuery(document).ready(function(){ jQuery('#jsArticleStep5 span.image a:first').attr('href','http://i.ehow.com/images/a05/k7/ln/troubleshoot-_a-home-network-1.5-800X800.jpg'); }); Another thing to try is to go to start and right click on My Computer and choose Properties. View the computer Name tab. Each of your computers should have a different name and the same work group name on it. If they do not have different names then you will have to change them. Restart your computers you adjusted and see if this made a difference.
jQuery(document).ready(function(){ jQuery('#jsArticleStep6 span.image a:first').attr('href','http://i.ehow.com/images/a05/k7/ln/troubleshoot-_a-home-network-1.6-800X800.jpg'); }); You can also try something else by going to each computer and click Start, All Programs, Accessories and then Command Prompt. In the Command Prompt window, type ipconfig and then press Enter. Under the Local Area Command Prompt entry, Windows should show you a different address for each of your computers. If any of your computers have the same address or if the addresses are not similar, then you will need to repair this before proceeding.
jQuery(document).ready(function(){ jQuery('#jsArticleStep7 span.image a:first').attr('href','http://i.ehow.com/images/a05/k7/ln/troubleshoot-_a-home-network-1.7-800X800.jpg'); }); In the same Prompt Window as above and from only one computer, use the ping command to see if that computer can communicate with each of your other computers. To do this, type x.x.x.x in the Command Prompt Window. You are substituting the actual I.P address of your other computers for x.x.x.x in turn. You should be seeing several Reply from lines each time you do this. If any computer does not respond, then you have a cable or hardware problem. Repair this first then proceed with further tests.
jQuery(document).ready(function(){ jQuery('#jsArticleStep8 span.image a:first').attr('href','http://i.ehow.com/images/a05/k7/ln/troubleshoot-_a-home-network-1.8-800X800.jpg'); }); Make sure that all of your computers have the same network protocols.
jQuery(document).ready(function(){ jQuery('#jsArticleStep9 span.image a:first').attr('href','http://i.ehow.com/images/a05/k7/ln/troubleshoot-_a-home-network-1.9-800X800.jpg'); }); If you still are having trouble with your Windows Network you may have to call in a professional or a computer experienced friend to help you.

Jan 08, 2011 | Intel Computers & Internet

1 Answer

My comfort zone infrared hearter has a display message of A05 and will not run, what does that mean? How can I fix it?

Hi. I have the Comfort zone 1500 (cz 1500) and just ran into this AO5 problem. Turns out the thermostat was set lower than the actual room temperature. I just turned up the heater temp and it kicked right on. Hope this helps!

Nov 16, 2010 | Comfort Zone Heating & Cooling

2 Answers

Autofry error message A05 what does it meen

The error message is that the oil is not reaching the set temperature in 16 minutes. Please contact AUTOFRY for more technical support. 1-800-348-2976 ext. 112

~Autofry

Feb 23, 2010 | Kitchen Appliances - Others

1 Answer

Led states A05 problem and machine stopped working

Hi,
"Error A05 - Pressure switch has not been reset "

This is centered around the filter and drain area not working properly.
It is possible it just needs the filter cleaning and the hose flushing out, but also possible the pump needs to come out to clean it properly.
Drain it by putting the hose low down, and clean the filters of debris.
If this does not fix it, then remove the unit outside, lie on it's back and remove the pump to clean it.

Feb 09, 2010 | Indesit 24 in. DE73 Evolution...

1 Answer

A05 code

Indesit Error Messages and Error Codes Indesit Dishwashers

F10 - Fill or empty time out. Check that the hoses are not kinked, that the taps are on or whether the drain pump or hose is blocked.
F11 - Heater timed out. The heater has not reached the required level. Book a service engineer.
F20 - Temperature under range. Book a service engineer. .
F21 - Temperature over range. Book a service engineer.

Fault codes for Indesit LCD Dishwasher Models

A01 - Float switch operated - Book a service engineer.
A02 - Open/Short circuit heater relay - Book a service engineer.
A03 - Short circuit on thermistor - Book a service engineer.
A04 - Unable to reach or sense temperature within 70 minutes - Book service engineer.
A05 - Pressure switch has not been reset - Book a service engineer.
A07 - Open/Short circuit wash motor triac - Book a service engineer.
A08 - Open/Short circuit auxiliary wash motor triac - Book a service engineer.
A09 - Open/Short circuit with main wash traic - Book a service engineer.
A10 - Open/Short circuit fill valve traic - Book a service engineer.
A11 - Half load valve traic or alternating motor action - Book a service engineer.
A12 - Open circuit heater rely - Book a service engineer.
A13 - Open/Short circuit dispenser traic - Book a service engineer.
A14 - Drain hose too low causing syphoning. Check drain hose and re-adjust.
H20 - Check tap and pressure of incoming water.