Question about Health & Beauty

Open Question

I turn chair on, and get all the lights ,but i get a red light a top blinking and yellow at bottom. chair wont move

Posted by Danny Beane on

Ad

5 Related Answers

williamhobbs

  • 16 Answers

SOURCE: power chair lights

The problem was a bad joystick. A local company came out to replace it and it works fine now.

Posted on Mar 07, 2009

Ad

Anonymous

  • 2 Answers

SOURCE: The charge lights blink and the chair won,t go.

Just had this problem with my Guardian Aspire. They had to replace the electronic box with the joy stick. BIG BUCKS!

Posted on Mar 13, 2009

Ad

Anonymous

  • 1 Answer

SOURCE: All six lights blink on my Jet 3

I just had the same problem with my uncle's power chair. The number of "blinks" indicates a problem code to the technicians. My chair needed the joystick control assembly replaced. Once replaced, evrything was back to normal. 'Not a cheap fix but much needed. Good luck my friend!!

Posted on May 06, 2009

Anonymous

  • 32 Answers

SOURCE: wheelchair will not run. lights blink on and off

may have damaged one of the two motors or disconnected motor plug.

Posted on Jul 13, 2009

HoverTech

Donna Angelo

  • 232 Answers

SOURCE: How do I charge the Hoveround mpv 4? I plugged the

Firstly, it is bad news to use an extension cord with the charger as it can get very hot. It will sometimes take 8-12 hours to get a full charge on the batteries. If the light does not go to green on the charger, the batteries may be damaged and not able to take a charge. This is especially true if the Power chair was stored after your father in law died; the gel in the batteries may have gone solid. The lights on the controller will go left to right then back if the charger is connected properly.
The brake release knobs both need to be in the UP/DRIVE position for the motors to engage.

Posted on Oct 01, 2010

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Invacare what does it mean when light on charger continually blinks red when charging, It wont move


The red light is the power light and if the red light is blinking the charger is bad or the wiring is bad on the chair or the batteries are bad. Usually it's the charger.

Aug 12, 2014 | Invacare Supply Group Pronto M61 Standard...

1 Answer

Jazzy 1107 power chair won't move


3 flashes indicate that there is a short circuit to the left motor and battery connection. Check wiring and connections

Jun 14, 2013 | Pride Jazzy 1113 ATS Indoor Power...

1 Answer

Blinking yellow wrench light on pride jazzy 614 HD


Your version has a Dynamic Controls model controller and joystick.
Unplug the charger and engage the motor/brake lever so the chair is no longer in free-wheel mode (con't push by hand)
Turn the chair off, wait 5 seconds, turn the chair back.
If chair still does not run and your wrench is flashing you have a problem. Count the wrench flashes - the flash count indicates the error detected. 3, 4, 5, and 6 flashes indicate and error with the motors.
3=Left motor fault
4=Right motor fault
5=Left brake fault (may not be engaged)
6=Right brake fault (may not be engaged)
Any other fault code usually means the electronics or wiring is bad and not worth fixing.

Jan 06, 2013 | Pride Jazzy 614 Hd JAZZY 614HD

1 Answer

Jet 3 ultra power chair won't move


Move the freewheel levers back and forth so the chair does not move drive position

I’m happy to assist further over the phone at https://www.6ya.com/expert/bill_bcbb89783b08c489

May 25, 2012 | Jet 3 Ultra Power Chair

1 Answer

When I plug it in to charge the red and amber lights stay lit and the green flashes and if i move the joystick everything is backwards push forward goes backwards left is right. b4 when it was plugged in...


sounds like a charger inhibit problem. Whenever you charge your chair the charger inhibit shuts down the chair so it can't be moved while charging. If you are getting this then that function is not working. Lets try this if you know of someone who has a chair or scooter with an off-board charger see if you can borrow it. Plug the off-board charger into the charger port located under the front of the joystick (don't have the on-board charger plugged in) and then turn the charger on. turn the chair's power on and you hopefully will see the lights blinking again indicating a charger plugged in (charger inhibit) the lights on the charger should be red and yellow (yellow turning green when fully charged) If you still get the problem with the off-board charger then your problem is in the controller or power module and this requires a new one. If Medicare paid for your chair you can call Repair Xpress @ 1-877-81-3733 or Roadrunner Mobility @ 1-800-467-2668 to have them fix it for you and bill Medicare for most of the repair costs. Hope this helps you

Oct 31, 2010 | Invacare Pronto M51 Power Wheelchair

1 Answer

Wont move yellow lights ,flashing


The number of lights that are blinking indicate what the problem is. Visit this site to locate the type on controller on your power chair and you will be able to see that the blinking lights mean:
http://www.pgdt.com/scenter/diagnostics/diagvsi.html
Try to reset your manual brake release as this is a common problem.
If you continue to have a problem, contact your manufacturer or dealer for service. If your insurance purchased they power chair for you, they may also cover the cost of repairs.
Good luck!

Sep 10, 2010 | Pride Jazzy 1103 Ultra Standard Power...

1 Answer

When turning power it makes a clicking sound but does not power up. battery charger has a red and green light on. When plugged in and turned on it flashes 8 times. I checked the power control connection,...


The chair will not move if the charger is plugged in. The flashes are normal with the charger plugged into the chair. The lights on the charger mean that the batteries have been fully charged. Red and yellow lights mean charging. After you unplug the charger from the chair (if off-baord charger, turn charger off or unplug from the wall) then unplug from joystick. after plug is removed from joystick press the on button and all the battery lights should be lit and when you move the joystick forward you will hear the electric bake release and the chair should move forward etc Hope this helps

Aug 10, 2010 | Pride Jazzy Select 6 Indoor Power...

1 Answer

Chair no longer charges, no flashing or blinking, lights,


The number of lights that are blinking indicate what the problem is. Visit this site to locate the type on controller on your power chair and you will be able to see that the blinking lights mean:
http://www.pgdt.com/scenter/diagnostics/diagvsi.html
Try to reset your manual brake release as this is a common problem.
If you continue to have a problem, contact your manufacturer or dealer for service. If your insurance purchased they power chair for you, they may also cover the cost of repairs.
Good luck!

May 07, 2010 | Pride Jazzy 1103 Ultra Standard Power...

1 Answer

Red light on my jet 7 keeps blinking and chair barely moves.


Sound like the batteries are on their last leg. Have them load tested.

Jul 17, 2009 | Jet 3 Ultra Power Chair

Not finding what you are looking for?
Health & Beauty Logo

Related Topics:

142 people viewed this question

Ask a Question

Usually answered in minutes!

Top Health & Beauty Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

ray gallant

Level 3 Expert

70046 Answers

Andrew Taylor
Andrew Taylor

Level 3 Expert

34565 Answers

Are you a Health and Beauty Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...