Can I use a Bluetooth adapter with this set? - Panasonic VIERA TC-P55ST50 55 in. 3D Plasma HDTV

Unfortunately, Logitech does not offer any Bluetooth support for the Logitech Y-RAJ56A keyboard. The keyboard is designed to be used with a wired connection, and it does not have any Bluetooth capabilities.

Yes, you can use a Bluetooth adapter to connect your Logitech Y-RAJ56A keyboard to a Bluetooth enabled device. However, you should bear in mind that the keyboard will not have any additional features or support when connected via Bluetooth.

So you will need to purchase a Bluetooth adapter. The Kinivo BTD-400 Bluetooth 4.0 USB Adapter is a good choice and is compatible with most versions of Windows and Mac.

P.S.
BTD400 Advisory
A recent update to Windows is preventing the BTD-400 from locating drivers automatically when plugged in for the first time. Please visit the article below to set up the BTD-400 Bluetooth Adapter for the first time.
BTD400 Driver Installation

It is Bluetooth ready WHEN you connect the adapter. It says in the manual. Have a look here, and if I Google the adapter, everyone is sold out.

https://www.crutchfield.ca/S-lvBqk6S0P4E/p_105KSBTA10/JVC-KS-BTA100.html

For Bluetooth operations, it is required to connect the Bluetooth adapter, KS-BTA100 (not supplied) to the auxiliary input jack (R-AUX/BT ADAPTER) on the rear of the unit. (page 9)
• For details, refer also to the instructions supplied with the Bluetooth adapter and the Bluetooth device.

Walmart SOLD OUT

https://www.walmart.com/ip/JVC-KS-BTA100-Car-audio-Bluetooth-adapter/16914351

Using Bluetooth ® Devices - JVC KD-R336 Instructions Manualhttps://www.manualslib.com > ... > Instructions manual
JVC KD-R336 Manual Online: Using Bluetooth ® Devices. ... For Bluetooth operations, it is required to connect the Bluetooth adapter, ... your phone.

..

Extracted From the USER GUIDE (download here) http://h10032.www1.hp.com/ctg/Manual/c02648771.pdf



Set up the printer for Bluetooth communication
The printer allows you to print documents from
Bluetooth devices without a cable connection.
Simply print from a Bluetooth device such as a PDA or camera phone. You can also use Bluetooth technology to print from a computer to the printer.
Set up a Bluetooth wireless connection
This section describes how to set up and configure the device for a Bluetooth wireless connection.
You can configure Bluetooth wireless settings during software installation, or you can configure settings later using Toolbox (Windows), HP Utility (Mac OS X), or the Toolbox software for PDAs
(Windows Mobile). For more information, see Printer management tools.
To connect the printer using Bluetooth communication (Windows)
NOTE:
If you are using an external Bluetooth adapter for your computer, specific instructions for adding the printer might be different. For more information, see the documentation or utility provided with the Bluetooth adapter.
1.
If you are using an external Bluetooth adapter for your computer, make sure your computer is started and then attach the Bluetooth adapter to a USB port on the computer.
If your computer has Bluetooth built in, just make sure the computer is started and that Bluetooth is turned on.
2.
On the Windows taskbar,
click Start
, click Control Panel
, click Hardware and Sound
, and then click Add a printer
.
- Or -
Click Start
, click Printer
or
Printers and Faxes, and then double-click the Add Printer icon
or click Add a printer
.
3.
Follow the onscreen instructions to finish the installation.
To connect the printer using Bluetooth communication (Mac OS X)
1.
If you are using an external Bluetooth adapter for your computer, make sure your computer is started and then attach the Bluetooth adapter to a USB port on the computer.
If your computer has Bluetooth built in, just make sure the computer is started and that Bluetooth is turned on.
2.
Click
System Preferences in the Dock, and then click Print & Fax
.
3.
Click + (Add).
4.
Select the entry for the printer in the list with Bluetooth beside its name, and then click Add
.
5.
Follow the onscreen instructions to finish the installation.
Set Bluetooth security for the printer
You can enable the following printer security settings:
• Require passkey authentication prior to someone printing to the printer from a Bluetooth device.
• Make the printer visible or invisible to Bluetooth printers that are within range.
• To enable these settings, you can use Toolbox (Windows), HP Utility (Mac OS X), or the Toolbox software for PDAs (Windows Mobile). For more information, see Printer management tools.
Set up the printer for Bluetooth communication 93

Use a passkey to authenticate Bluetooth devices
You can set the security level of the printer to either
High or Low
.
• Low : The printer does not require a passkey. Any Bluetooth device within range can print to it.
NOTE:
The default security setting is Low
. Low level security does not require authentication.
• High: The printer requires a passkey from the Bluetooth device before allowing the printer to send a print job to it.
NOTE:
The printer ships with a predefined passkey that is set to six zeroes "000000".
Set the printer to be visible or not visible to Bluetooth devices
You can set the printer to be either visible to Bluetooth devices (public) or not visible to any (private).
•Visible : Any Bluetooth device within range can print to the printer.
• Not visible : Only Bluetooth devices that have stor
ed the device address of the printer can print to it.
NOTE:
The printer ships with a default accessibility level of Visible
.
To reset to factory default settings
NOTE:
Using the following instructions will reset only the device's Bluetooth settings.
1. Press and hold down (Power button).
2. While holding down (Power button), press (Cancel button) 4 times, then press (Resume button) 6 times.
3.Release (Power button).

some laptops come with bluetooth modules available some dont.

assuming the bluetooth module is avaliable:

1. switch on you wireless adapter
2. check for programs or utilities that managers your wireless
   
3. check if the setting for bluetooth and set to on or enabled
4. you might need to set it to discoverable if you need to search and and send some files to you lap

then assuming that Bluetooth module is not available:

1. you need to buy bluetooth adapters that you will plug and play
2. install the neccessary drivers and utility programs
   
3. then follow the above steps
   

Make sure you are inserting a compatible memory card for your model. Below is the list of compatible digital media memory cards for the Lexmark P350 printer:

• CompactFlash I & II
• Sony Memory Stick, Memory Stick PRO
• Secure Digital (SD) Card
• MultiMediaCard (MMC)
• xD Card
• Sony Memory Stick Duo (with adapter)
• Mini Secure Digital (Mini SD) Card (with adapter)
• Sony Memory Stick PRO Duo (with adapter)
• SanDisk TransFlash Memory Module (with adapter)
• RS-MMC (with adapter)

Guidelines to print via bluetooth:

• You can print photos from a Bluetooth-enabled device such as a camera phone using a USB Bluetooth adapter.
• Make sure that the Bluetooth Enable and Discovery Mode selections on your printer are set to On.
• Insert a USB Bluetooth adapter into the PictBridge port on the front of the printer.

Note: Bluetooth adapter sold separately.

• Once the printer detects the Bluetooth adapter, the following message appears on the printer display for five seconds: Bluetooth Dongle Connected.
• To print photos from your Bluetooth-enabled device, see the documentation that came with the product.

Hi,

You can connect your Pantech Link to your Windows 7 computer using the phone's built-in Bluetooth adapter. If your computer doesn't have a Bluetooth adapter bulit-in, you can connect the phone via a USB port. Once you connect your Link to your computer, you can use the phone as a modem, or transfer files back and forth between the phone and the computer.

Press the "Menu" key on the Pantech Link and select "Settings."

Open "Connectivity" and choose "Bluetooth," then "Activation." Set the option to "On" and press "Select."

Click "Back" and open "Visibility." Click "Show" and press "Select."

Click "Start" on the PC task bar, then click "Devices and Printers."

Right-click on your Bluetooth adapter and left-click "Bluetooth Settings." Check the box labeled "Allow Bluetooth Devices to Find This Computer" and click the "OK" button.

Click "Add a device" at the top of the screen. A new window pop ups, showing the nearby Bluetooth devices.

Highlight the Pantech Link and click "Next." A random number appears on the next screen.

Wait for the Pantech Link to prompt you for the number, then type the number into the phone and press "Select" to finish the pairing process.

Right-click on the Bluetooth adapter on the computer and left-click "Bluetooth Settings." Uncheck the "Allow Bluetooth Devices to Find This Computer" box and press the "OK" button. This prevents the computer from showing on other Bluetooth devices.

Regards.

Check in your device manager to see if your bluetooth device is enabled. Also check in the Bios settings and in your power management to see if there are any settings there for the bluetooth.

If there are no entries for bluetooth in device manager, you may need to buy a USB bluetooth adapter. I know that some models of Acer laptops are bluetooth capable, but do not have the internal bluetooth adapter.

no you need to buy a bluetooth adapter its only an emulator that is installed at factory and theese are usually useless gd news is a adapter is only about £10 from argos

you have to make sure within the bluetooth settings on your pc that your pc is discoverable, this is turned off by default, if you are using the software that came with the adapter it must be in the connection settings somehere