Question about Blomberg Refrigerators

1 Answer

How do I fix error code 9

I have blinking e 9 code on my control panel

Posted by David on

Ad

1 Answer

Kardoc

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Blomberg Master
  • 6,120 Answers

Codes should be in the manual. If you lost yours https://www.blombergappliances.com/user-manuals

Posted on Feb 25, 2019

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Kid 60 s10 please give fault codes


Hi Roger, Hope this helps......CHEERS..

KENMORE DISHWASHER ERROR CODES

Kenmore Dishwasher Error Code = Start Resume light blinking slow
When the dishwasher door opens or electrical power is removed during the cycle then the dishwasher will not start again. The door is detected as being closed and the Start Resume button is being pressed
Kenmore Dishwasher Error Code = Clean light is blinking 7 times
Heater circuit fail. Control panel did not detect the water getting hot. Did not detect heating element was energized to heat the water during the wash cycle
Kenmore Dishwasher Error Code = Sanitize LED blinking at end of cycle
Control panel could not detect if sanitation has been achieved
Kenmore Dishwasher Error Code = Console light blinking rapidly
There is a stuck button on the control panel
Kenmore Dishwasher Error Code = Clean light is constantly illuminated
Dishwasher cannot start a wash cycle until it sees that the door has been opened after the previous washing cycle
Kenmore Dishwasher Error Code = Control lock LED is ON but not responding to pressing of the keys
Turned on by accident or there is a control detected key pad problem

Mar 31, 2016 | Kenmore Dishwashers

1 Answer

50 inch panasonic viera blinks 9 times no power


That's a error code but its different for various models. I will need the model number of the set in order to let you know what the 9 blink error indicates for your model Panasonic.

Jan 10, 2013 | Televison & Video

1 Answer

Sony Trinitron won't turn on red light blinks 9 times


Nine blinks - Replace D 6116 and D 6301 on the "G" board, do not re-solder as this will fix the problem temporary. Or Panel Module Error or Thermal Error. If it is intermittent 9 blinks, meaning sometimes the TV comes on and other times you get flashing, then change the switching regulator on the "G" board or check connections. Make sure the regulator is -12 or -13 (negative).

Apr 29, 2012 | Sony FD Trinitron WEGA KV-32FS120 32" TV

1 Answer

Won't turn on, light flashed 9 times


the 9 blinks is indicating a panel SOS which means the Panel itself is whats causing the 9 blink error code.

Mar 24, 2012 | Panasonic Viera TH-42PZ85U 42 in. Plasma...

1 Answer

TV won't turn on and standby light blinks 9 times... what can I do to fix this? Thanks, David


Nine blinks - Indication of shorted/leaky diodes - D6116 and D6301 on the "G" board. Panel Module Error or Thermal Error. Unless you are technically experienced, this can only be repaired by an authorised service centre. Obtain a quote for this, the parts are inexpensive, but labour costs might not be.

If it is intermittent 9 blinks, meaning sometimes the TV comes on and other times you get flashing, then change the switching IC regulator on the "G" board or check connections. Make sure the regulator is -12V or -13V (negative rail).

If the repair is done by an approved workshop, they will clear the error codes (standby LED blinks) as part of their 'soak-testing' and it should reset the TV back to factory condition. Remember to ask about what work was done and if the errors have been cleared/reset before you pay their bill.

Mar 27, 2011 | Sony FD Trinitron WEGA KV-32FS120 32" TV

1 Answer

Red stand by light blinks 8 or 9 times and no picture or sound


hello Problem with the audio (AUDIO), unit goes to standby and blinks the self-diagnosis code. Check IC406 audio amp, PS401, and 402. On some projection models of Sony TV sets, this code means that T8005 (flyback transformer), or the associative components in the high voltage circuits are defective on the D board.Nine blinks - Replace D 6116 and D 6301 on the "G" board, do not resolder as this will fix the problem temporary. Or Panel Module Error or Thermal Error. If it is intermittent 9 blinks, meaning sometimes the TV comes on and other times you get flashing, then change the switching regulator on the "G" board or check connections. Make sure the regulator is -12 or -13 (negitive).

shaun

Oct 18, 2009 | Sony KP-51WS510 51" Rear Projection...

2 Answers

Sony kds-60a300


Hi,

9 blink refers to :-

Nine blinks - Replace D 6116 and D 6301 on the "G" board, do not resolder as this will fix the problem temporary. Or Panel Module Error or Thermal Error. If it is intermittent 9 blinks, meaning sometimes the TV comes on and other times you get flashing, then change the switching regulator on the "G" board or check connections. Make sure the regulator is -12 or -13 (negitive)

Thanks for using "Fixya".

Jun 24, 2009 | Sony KDS-60A3000 60" HDTV

1 Answer

Won't turn on


Diagnostic code meaning;

  • Nine blinks - Replace D 6116 and D 6301 on the "G" board, do not resolder as this will fix the problem temporary. Or Panel Module Error or Thermal Error. If it is intermittent 9 blinks, meaning sometimes the TV comes on and other times you get flashing, then change the switching regulator on the "G" board or check connections. Make sure the regulator is -12 or -13 (negitive).


  • Hope it may help you;

    Regards,
    VOTIT

    Sep 15, 2008 | Sony KP-46WT520 46" Rear Projection...

    3 Answers

    9 red blinks


    Can you verify that its 9 blinks? There is no error code in that set for 9. also please verify that its a kdsr50xbr1

    Thanks
    Tim

    Jun 29, 2008 | Sony KDS-R50XBR1 50" HDTV

    Not finding what you are looking for?
    Refrigerators Logo

    Related Topics:

    615 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Blomberg Refrigerators Experts

    Marvin
    Marvin

    Level 3 Expert

    85239 Answers

    john h

    Level 3 Expert

    23515 Answers

    ray gallant

    Level 3 Expert

    71004 Answers

    Are you a Blomberg Refrigerator Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...