Canon PIXMA iP3500 Printer Logo

Related Topics:

Osman Munshi Posted on Dec 24, 2015

Printed one page, power light went off, printer stopped working. Checked power lead - it's fine !

2 Related Answers

Anonymous

  • 31 Answers
  • Posted on Sep 23, 2009

SOURCE: LBP 2900 printer settings and number of pages printed

If you have this setup on a network cable, the User interface (IP address of printer) should allow you to see this in the admin panel.

Sincerely,

Ryan Deschaine

Systems Administrator

Boxen Solutions LLC

http://www.boxensolutions.com
Email address: [email protected]
Office number: 262.254.0064
Mobile number: 262.834-5844
Fax: 414.918.8432
AOL: BoxenRyan
Twitter: BoxenRyan
W172 N9175 Shady Lane
Suite 418
Menomonee Falls, WI 53051

Ad

Anonymous

  • 3153 Answers
  • Posted on Aug 18, 2010

SOURCE: printer says check cable. Cable checked is fine

Make sure the USB cable goes DIRECTLY to the computer and not via a USB hub or anything similar

Also try another cable preferably shorter if you can as not all USB cables are the same even though they should be.

Remove as many other USB devices as you can PRIOR to the above steps and then try.

Also double check you dont have two copies of the printer installed as this is another common error.

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1helpful
1answer

HP Officejet pro 8625 stopped printing

Disconnect the electrical plug. Leave unplugged for a couple of minutes. Replug the machine and see if the printer has reset itself.
0helpful
1answer

Print queue shows jobs stacked well after jobs printed

Best is to uninstall printer from computer and reinstall it again. Worked for me.

If you need further help, I’m available over the phone at https://www.6ya.com/expert/alex_22751bbefa74c3d0

1helpful
1answer

Brother MFC-7420 printing light after installing new cartridge

It could be an issue with the drum unit either being faulty or the internal drum counter having been reset sometime after a new drum was installed. I would recommend removing the currently installed drum unit and trying it in the second printer you mentioned with the toner cartridges that has been confirmed as working.

If the problem persists it is likely to be a froblem with a fuser or another internal part that is not traditionally a consumable item. In which case I would recommend contacting Brother or a printer technician.
0helpful
1answer

Brother HL2070N printed 1 page fine,then nothing but light streak

turn off printer, remove cartridge and drum and clean internally.
reinstall drum and cartridge and do a test print, hopefully all will be better.
1helpful
2answers

F380 deskjet - error - refuses to pront

I have this printer with the same problem , worked fine for 1 year, printed over 1600 pages total ( according to the built in HP program that records how many pages I printed and how many times I used the printer) then it stopped printing. The ink cartridges are new, the software is fine, and it says ink levels are good. It physically goes through the motions of printing, loads the paper, makes all the normal sounds it used to and pushes out the paper when it's done - but the page is blank. I did some surfing and read some info that some HP printers are pre-programmed to stop certain functions so you buy a new printer. I know that might sound crazy. How long have you had the printer and how many pages do you think you printed?
3helpful
4answers

Brother 5250

I had the same problem on 4 Brother HL-5250's, I checked the whole printer, and couldn't find a paper jam, yet the red printer light wouldn't shut off. I finally followed the instructions on Brother's website for removing a paper jam, and the solution for all 4 printers was paper stuck in the fuser cover. See below on how to open the fuser cover.

Pull the tabs at the left and right hand sides toward you to open the fuser cover (1).
  1. a5250_u_g062.gif
  2. Hint
  3. There are 2 kinds of covers at the rear of the printer. Please make sure to open both the back cover (step 7) and the fuser cover (step8).
  • 0helpful
    2answers

    Printer

    hi when u print another page click on the option current page and than print.
    0helpful
    1answer

    Dell 810 not printing

    Dear chibihamster, It seems that there is some loose connection in your printer. If you have a little knowledge in hardware, please open your printer carefully, check all the connected cable specially the printer head connector. The best way is that disconnect the printer head cable and reconnect it again. Do not do anything in your scanner circuit area, otherwise it will create you more problems. If this doesn't solve your problem, please contact the manufacturer. GOOD LUCK!!
    Not finding what you are looking for?

    64 views

    Ask a Question

    Usually answered in minutes!

    Top Canon Office Equipment & Supplies Experts

    old marine
    old marine

    Level 3 Expert

    2426 Answers

    ZJ Limited
    ZJ Limited

    Level 3 Expert

    17989 Answers

    Cindy Wells

    Level 3 Expert

    6688 Answers

    Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...