How do I set my time and date on a GE 2631? - GE Lands Phones

Does it keep losing the date when you turn it off? or are you asking how to set the time and date?

If you're losing time and date when you turn the unit off, there's a coin cell battery on the main processor board that needs replacing.

If you just want to set the time and date - Press "SHIFT" and 12 lead keys at the same time. select "7" for date and time, use the return key to select date or time

http://www.frankshospitalworkshop.com/equipment/documents/ecg/user_manuals/Marquette%20MAC%2015%20ECG%20-%20User%20manual.pdf


Page 12-3 or 201 in Adobe Reader has info for setting up date and time

Press and hold the STOP/SET button for two seconds, then release to access the set-up menu. The time/date setting follows the language.

The full details are in the "Changing the Settings" section of the manual (page 10 in my copy). If you need a copy of the manual, you can download one at
http://www.home-electronics.net/ge/pc/IB/29875GE1_IB.pdf

"REMINDER: The time and date are programmed automatically when the first Caller ID record is successfully received after set up."

The quote is from the fifth column of the first page of the manual at
http://www.home-electronics.net/ge/pc/IB/29490GE2_IB.pdf

The magnetron draws a lot of power and the mains may be dipping beneath an acceptable level, causing the panel to reset.
Check the supply cable size and any connections.

You can download the manual at
http://www.home-electronics.net/ge/pc/IB/29875GE1_IB.pdf

You can download the manual at
http://www.home-electronics.net/ge/pc/IB/29875GE1_IB.pdf

You can download the phone manual here:

http://www.home-electronics.net/ge/pc/IB/25942GE2_IB.pdf

It explains the time/date setting (done from the handset).

here is the link to the user manual.instructions to do that should be in there.
User Manual