When ordered, said it was for Windows 10, but on the box says Window 8.1, 8 or 7. So will it work on windows 10

How to turn wireless WiFi on/off Windows 7, 8, 8.1, & 10

Description

This article describes how to turn the WiFi radio on or off. Follow the provided instructions to enable the wireless card.
There are several ways to turn the wireless radio on or off.

• Software switch
• Physical switch

Applicable Brands

• Lenovo Laptops & Desktops
• ThinkPad
• ideapad
• ideacentre
• ThinkCentre

Operating Systems

• Windows 7
• Windows 8, 8.1
• Windows 10

Solution

• Unable to detect any wireless networks in range Window 7, 8 & 10.Window 8 & 8.1
  
  1. From the Windows Start Screen, search Turn wireless devices on or off.
  2. Enable or disable Airplane Mode to stop all wireless communication. Under Wireless Devices, choose whether to enable or disable WiFi and Bluetooth.
     
     
     
     If there is no Wi-Fi option present, see Unable to detect any wireless networks in range Window 7, 8 & 10.
  Windows 10
  
  1. Click the Windows button -> Settings -> Network & Internet.
  2. Slide WiFi On, then available networks will be listed. Click Connect. Disable/Enable WiFi.
     
     
     
     If there is no Wi-Fi option present, follow Unable to detect any wireless networks in range. Window 7, 8 & 10.

1. The power windows system is a generic electronic module (GEM) controlled system. For additional information regarding GEM diagnostic strategies, for additional information, REFER to Section 419-10 .

1. Verify the customer concern by operating the power windows system.

1. Visually inspect for obvious signs of mechanical and electrical damage.

Visual Inspection Chart Mechanical Electrical

• Window regulator electric drive
• Window glass

• Central junction box (CJB) Fuse:
  • 6 (5A)
  • 8 (5A)
  • 15 (5A)
  • 20 (5A)
• Battery junction box (BJB) Fuse:
  • 103 (50A)
  • 110 (30A)
• Relay(s)
• CJB
• Window regulator control switch
• Window regulator electric drive
• GEM
• Circuitry
• Damaged wiring harness
• Loose or corroded connector(s)

For Windows OS technical errors, the easiest way is to reach Windows technical customer service. They provide an instant solution and help for email setup and password related issues.

Services offered-

Factory reset windows
Restore Windows solution
Windows Password lost solution
Technical support for Windows 7, 8 and 10
Support for Windows XP
Windows update
Windows uninstall, install, reinstall
Fix corrupted windows
Windows BSOD error

Dial directly 1888-315-9712

windows error 0x80070005 solution

try this may be it works work for windows 10
1. put windows 7 bootable dvd on your dvd rom
2. when you see the install windows screen type "SHIFT" + "F10"
3. now you can see the Command prompt (CMD) and type the following command
regedit.exe
Press "enter" key
4. now you get register edit window, after select File and click import
5. now you can see import registry file window
6. click computer and open c: drive on your registry file window
7. now open windows > system32 folder
8. change to " *.reg " to " all files "
9. now find and rename "sethc" file in to "sethc1"
10. now copy and paste the "cmd" file and you get "cmd copy"
11. rename "cmd copy" in to "sethc"
12. and close all open file and restart your computer
13. now after boot the windows you get password screen
14. after press " Shift " key continuously
15. now you can see CMD screen (dos screen) and type following command
net user
press enter key
now you can see user account on your pc (find out which account you need to reset password and type following commands
net user youraccountname 0
16. net user is dos command
youraccountbane is username
0 is (zero) new password
17. now closed CMD screen (DOS screen)
18. type 0 on you password box and enter

Good luck!

I suspect not since it was designed for windows XP, though will work with 7.
There's is another version designed to work with windows 8, but there's no guarantee that will work with 10. It seems some software used a component that was discontinued with any windows version 8.1. and onwards.

What software are you using with this device as Pinnacle studio 16 won't launch with Windows 8 8.1
see link below for patch that might fix problem
http://corel.force.com/pinnacle/articles/en_US/Master_Article/Pinnacle-Studio-16-won-t-launch-after-the-Windows-8-1-is-installed?lang=en_US&productTopCategory=Pinnacle_Products&source=kba
It could be a device driver issue but I have not found a windows 8 driver for a DVC-10

1. Go to START
2. select MY COMPUTER
3. Once in the new window, click MY NETWORK PLACES under the "OTHER PLACES" section
4. select the VIEW NETWORK CONNECTIONS link under the NETWORK TASKS section
5. RIGHT CLICK on your wireless network connection and choose PROPERTIES
6. click the WIRELESS NETWORKS tab.
7. make sure the "USER WINDOWS TO CONFIGURE MY WIRELESS NETWORK SETTINGS" box is checked
8. Click OK and close the window
9. RIGHT CLICK on your wireless network connection (the name of it) and choose REPAIR
10. if windows detects the wireless connection, you should see a bubble near the task bar
11. in order to begin using the wireless connection, open your web browser then enter your username and password (if required)