Epson Stylus CX3810 The On, Letter, 4" x 6", and fit to page green lights are blinking. The error and ink red lights are on steady. How can I fix this? Thank you.
SOURCE: Epson stylus photo R1800 printer
http://www.fixyourownprinter.com/forums/printer/35608
this website will answer all your problems
SOURCE: Epson stylus 880 printer
"Turn the printer on while holding down both the ink and paper buttons. When the paper light flashes release both buttons", then hold down the ink button for approx. half a minute until the printer lights flash again then release it. That resets the printer.”
SOURCE: Epson C48 red and green lights flashing alternately
Only Solution is Re-burn printer firmware.
Mahesh DG, Pune
SOURCE: epson stylus c42 plus
If both red and green lights are blinking, it usually means that your waste ink pads need replacing. This requires dismantling of the printer and resetting of the protection counter. If you feel up to it, respond with your e-mail address and I will send you instructions - but it's not easy.
SOURCE: epson stylus CX3810 Can not
You will find clear instructions on how to replace an ink cartridge at:
http://files.support.epson.com/pdf/cx38__/cx38__qr.pdf
Please post another comment if you require further help with this.
If this has information has helped you, please rate it.
1,062 views
Usually answered in minutes!
×