Why wont my controller work and I don't know the codes to all of t ts

TS? Sure it is not VS or WS model?

tengo un control TS-RC488 como programo para un DIVINCI DV 6030

I have the remote codes for memorex dvd player as 20695, 20231, 21270, there may be other codes of course. Dale

normaly press and hold the device you wish to program till the light stays on then enter code if the code is a valid one the light should go off and then you may be able to turn off tv if not repeat steps and use diff code here are the codes i know of for daewoo tv 0130 0004 0009 0100 0005 0138 0043 0140 0039 0252 0279 0444 0080 0042 0058 0017 0010 0126 0018 0127 0019

the codes are.....
136,177 or234 if those dont work do automatic code search...
A: power on the device you want to controll
B:press and hold the (set) keyand press the device key at the same time..
C:the LED will light at that moment then release the pressed keys..
D:PRESS THE SET KEY AGAIN THEN RELEASE IT. THE REMOTE ENTERS THE QUICK SEARCH MODE AND THE LED KEEPS FLASHING...
E:Point the remote at the device,then press the power key.see if it reacts or not.If not repete step E:

0079 0123 0063 0020 0004 0009 0226 0266 0006 0095 0122

codes for trisonic TS-RC466

Don't know if you have the original codes or not, but here are the codes for Phillips TV's from the original manual. Hope this helps. Try them one at a time and see if they work.

002, 009, 102, 109, 309, 402, 408, 502, 508, 807, 901, 914.

Good Luck,
Chris :-)

i need the manual and code for a control remote trisonic TS-R488

I HAVE A TRISONIC TS-RC488 AND LOST THE PAPER THAT WAS INSIDE THE REMOTE , THE INSTRUCTIONS CAN ANYONE TELL ME THE CODE FOR A SONY TV AND THE INSTRUCTIONS OF HOW TO SET UP THE UNIVERSAL TRISONIC ,,,, THANKS ,,,,, SINCERELY JOHN