# 1.7 cubic ft frig. What start up temp? - Haier Refrigerators

Posted by on

### aaahandy

• Level 2:

An expert who has achieved level 2 by getting 100 points

MVP:

An expert that gotÂ 5 achievements.

Habit-Forming:

Visited the website for 3 consecutive days.

New Friend:

An expert that has 1 follower.

• Expert

Try again cause I don't understand your question.

Posted on Mar 08, 2016

### geoff hunter

measure it.....width x depth x height.if you do it in centimeters then convert it it is easier........

Posted on Jul 10, 2010

### CO_IT_Gal

Do you have a model number?

Posted on Jan 31, 2015

×

my-video-file.mp4

×

## Related Questions:

### How many cubic yards would it take to fill a ditch 100ftx2ftwidex1/1/2ft deep

multiply the length (100 ft) by the depth (1.5 ft) by the width 2 ft and that results in a cubic ft measurement
divide that by 9 ( 9 cubic ft = 1 cubic yard ) and you have your answer
I am not going to work it out for you as it is grade 3 maths

May 25, 2016 | Fish

### Need to know how many cubic feet my frig is so I can compare when shopping for another.

This is the information I could find.

Refrigerator Type Side-by-Side Total Capacity Cu. Ft. 21.7 Cu. Ft. Refrigerator Capacity Cu. Ft. 14.40 Cu. Ft. Freezer Capacity Cu. Ft. 7.30 Cu. Ft. Energy StarÂ® Qualified Yes
Whirlpool Appliances for the Home Kitchen and Laundry Room

Bob

Mar 16, 2015 | Whirlpool Refrigerators

### How do i convert 60 tons of ashpalt to square yards

AC is approx. 145 lbs per cubic ft.
there are 27 cubic ft in 1 cubic yard
60 tons x 2000 = 120000 divided by 145 = 827.58 cubic ft divided by 27 = 30.65 cubic yards

square yards would depend on thickness of AC.
you can take thickness x sq ft to get cubic ft

in concrete 1 cubic yard =
4 inch thickness = 81 sq ft or 9 sq yrds
6 inch thickness = 54 sq ft or 6 sq yards

Feb 16, 2015 | Heating & Cooling

### Model# FRT17B3JW6. need to know cubic ft. for selling

Normally the first two numbers in the model number are the cubic feet. You have posted 2 model numbers, on appears to be 21 cubic feet and the other is 17 cubic feet.

Jan 21, 2013 | Magic Chef CTF2125 Top Freezer...

### 253.64802409 (model), serial #BA60607122. Top freezer and I am haqving to defrost freezer every 3-7 days. The frig part of it goes up to 60 degrees. I would like to know how many cubic feet this frig is

Just measure the the inside of the fzr and frige and multiply length x width x hieght this will give you your cubic feet. (you will have to convert inches to feet) It sounds like your defrost timer, heating element in freezer, or the Hi temp sensor for the defrost cycle is bad more than likely the timer or element. good luck

Aug 10, 2010 | Refrigerators

### I am trying to find out the cubic ft of the roper frig i just bought

measure it.....width x depth x height.if you do it in centimeters then convert it it is easier........

Jul 10, 2010 | Roper Refrigerators

### Food in the frig has been freezing even when the freezer is set to 3 and the frig is set to2 (mod. pss25mgmb) the unit is only about 6 yrs old

could be drain holes blocked or both temp sensors gone at same time ?? hardly.also have you tried a full manual defrost (no hot water) sometimes works for me

Feb 07, 2010 | GE Profile Arctica 25.4 Cubic Feet...

### Need cubic feet for a 1962 Fridgidaire Frig with a bottom freezer

It took a while but I went online to a website that has old newspapers. I looked for an ad in January 1962 newspapers. The model # is FP1-13B-62. The frig came in 13.3 cu ft with a bottom freezer that held 152 lbs.

Nov 29, 2009 | Frigidaire Refrigerators

## Open Questions:

#### Related Topics:

59 people viewed this question

Level 3 Expert

Level 3 Expert