Question about Kenmore Elite 45986 Front Load Washer

Open Question

WHAT SHOULD I DO? I LOVE MY MATCHING WACHER AND DRYER SET AND DONT WANT TO REPLACE IT? PLEASE ADVISE

I NEED HELP WHAT MUST I DO?I have a HE5 KENMORE DRYER THAT I BOUGHT AT SEARS AND THE POWER LIGHT COMES ON BUT IT WILL NOW POWER ON SEARS TECH SAID IT WAS THE INNER FACE BOARDS SO I REPLACED THEM MYSELF CORRECTLY PER ANOTHER HOME TECH REPAIRMAN.. BUT THE DRYER STILL WILL NOT POWER ON, WE CHECKED THE THERMAL FUSE AND ITS GOOD.. WHAT SHOULD I DO? I LOVE MY MATCHING WACHER AND DRYER SET AND DONT WANT TO REPLACE IT? PLEASE ADVISE

Posted by Pamela Moran on

Ad

4 Related Answers

mastatech

mark milligan

  • 478 Answers

SOURCE: need to replace thermal fuse on kenmore dryer 110.75924401

This fuse is located on the back on the wind tunnel exhaust.

Posted on Mar 14, 2009

Ad

Ricardo Jr

  • 3 Answers

SOURCE: kenmore elite oasis washer

Today (4/3/09) I got a letter from Sears. They will replace the electronic control board (you know, the F-51 business) for FREE, in warranty or not. Serial #s for the Bad Board begin: CS48 - CS52 or CT01-CT49. Call Sears at 800-847-9083. The voices of all of us have finally been heard! There is a class action attorney firm in San Francisco looking into a legal remedy.

Posted on Apr 04, 2009

Ad

prem mathew

  • 662 Answers

SOURCE: My clothes smell musty after they have been

The filter on your pump is probably clogged with lint and stuff. You have to remove the bottom front panel, 3 torx screws underneath. The panel will drop and come off. Drain off the excess water from the hose you see. The white filter cover is right in front. Get yourself a bunch of towels or a good big plastic bag to collect water. Unscrew the filter cover and twist the filter out. Clean out all the stuff and put it back in carefully.

Next: You can use Affresh to clean your front loader. Deposits of soap and other such things can be stuck around the inside tub of your washer. Try this product, it works great on all front loaders. Use quite hot water with the Affresh pellet with no clothes and run the machine through a cycle. Also helps with any stagnant water smells. Have you cleaned out your pump lately. Put the pellet inside the machine, not in the soap dispenser.
Pl give me a good rating for the free help, thanks.

Posted on Jun 03, 2010

blueextc3221

blueextc3221

  • 15935 Answers

SOURCE: kenmore elite dryer 110 8772 He5 lights up, will

MANUAL DIAGNOSTIC TEST

The washer must be empty and the control must be in the OFF state before pressing the touch-pad sequence to start the test.

Starting the Test Mode

-Close the door.

-Select any one key (except STOP) and follow the steps below, using the same key (remember the key):

Press/hold 4 sec's.
Release for 4 sec's.
Press/hold 4 sec's.
Release for 4 sec's.
Press/hold 4 sec's.
Release for 4 sec's.
Press/hold 4 sec's., release

NOTES:

-Press the same key to advance to the next failure code.

-At the end of the procedure the program will loop back to the beginning. This is a continuous loop.

-To cancel out of the Manual Test Mode press STOP.

Exit Condition Control Action To be Checked

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Posted on Sep 27, 2010

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Replace the heating element


here are some results I found on youtube one might help you see how it's done

http://www.youtube.com/results?search_query=Kenmore+HE5+Electric+Dryer+Replace+the+heating+element

Nov 24, 2014 | Kenmore HE5 Electric Dryer

1 Answer

Heat turns off while clothes still wet


change the gas coils on the gas valve by removing the 2 screws holding the bracket for the coils,remove the wire harnesses to each coil,dont worry one coil has 2 wires the other has 3 so quite hard to reverse

Jun 16, 2012 | Kenmore HE5

1 Answer

How do you replace the door switch? i have he5 kenmore elite


last on the list:

http://www.partselect.com/dryer+dryer-wont-tumble+repair.htm

Dec 02, 2010 | Kenmore HE5 Electric Dryer

1 Answer

Kenmore Elite HE5 front load dryer is making a loud squealling noice...Help?


Hi,
Here is a tip that I wrote about dryers and noises...

It will help you determine what is happening there...

Dryer Repair Squeaks, Grinding, Clicking and Knocking Noise


heatman101

Asker's Testimonial "That answer was very informative - thank you fortaking the time to educate me. " - teresa241964

Oct 06, 2010 | Kenmore HE5 Electric Dryer

1 Answer

Decreasing Timed Cycle Setting in a HE5 electric dryer


I think you need to cancel and restart to change the time to less.

Jan 14, 2009 | Kenmore Elite HE4 Electric Dryer

1 Answer

Kenmore He5 Dryer


try replacing the door strikes and catches part # 279570...possible door hinge issue but less likely

Aug 20, 2008 | Kenmore Elite HE4 Electric Dryer

3 Answers

Kenmore Elite HE5 Electric Dryer


I have a Kenmore HE5 Steam: after a power failure last week, now when you turn the dryer on and push"start" the cycle stops emediately and flashes PF...

May 07, 2008 | Kenmore Elite HE4 Electric Dryer

Not finding what you are looking for?
Kenmore Elite 45986 Front Load Washer Logo

93 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Washing Machines Experts

Michael Thomas
Michael Thomas

Level 3 Expert

3056 Answers

Paul Carew

Level 3 Expert

3527 Answers

Nicola Conroy

Level 3 Expert

1428 Answers

Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...