Lexmark need to know how to set my printer i have no disk...to help me ..i have a printer ...lexmark x1150 print trio

Puede descargar e instalar el controlador Lexmark X1150 visitando el sitio web de Lexmark en http://bit.ly/dPIEij. (Esto se traduce con translate http://translate.google.com/#.)

Take this link to Lexmark website and click on your desired driver download.

http://support.lexmark.com/index?locale=en&segment=DOWNLOAD&startover=y&userlocale=EN_US&question=X1150&productCode=LEXMARK_X1150&page=answers&detectedProductFacet=CMS-CATEGORY_REF.LEXMARK.PRODUCTS.ALLINONE.LEXMARK_X1150&searchid=1253967812763#2

Hey,

you can download the drivers for your printer from this lexmark page
http://downloads.lexmark.com/perl/downloads/downloads.cgi?ccs=229:1:0:0:0:0

Simply enter your Lexmark X1150 into the firest, Search by model field and click search.

Then select your windows version.

Download the drivers and software you require.


Let me know if you need anything else.


Thanks,
Ekse

Download the driver/software from this Lexmark link. On the left hand column, click on "Find Drivers and Downloads" On the next page type " X1150" in the search by model box.Then select "Lexmark x1150"

http://downloads.lexmark.com/perl/downloads/downloads.cgi

copy and paste the complete link into your browser.
If I could be of further assistance, let me know. If this helps or solves the issue, please rate it.
Thanks, Joe


I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_8b8c2cd6ce148309

goto http://support.lexmark.com/perl/support/support.cgi and type in model x1150 and it will bring up the driver software and manual

haalo waar kun je de software downloden???

http://downloads.lexmark.com/perl/downloads/downloads.cgi
under search models type...lexmark x1150
then enter your operating system

You can download the drivers for the Lexmark X1150 from Lexmark's web site here.

Regards,
Bob Headrick, Microsoft MVP Printing/Imaging

here the link hope u will rate me fix..

http://drivers.softpedia.com/progDownload/LEXMARK-Printer-X-Version-Download-1424.html

I have an x4550, running windows vista basic on an hp dv6000t notebook. i had the same problem. i contacted online lexmark tech and here's the solution that worked for me, thanks to help from lexmark (transcript of chat):

Please follow the steps given below to change the spool data format:
1. Click on "Start," "Control Panel," "Hardware and Sound" and "Printers."
2. Then, right click on the Lexmark printer icon and left click "Properties."
3. Either on the "Advanced" tab or the "General" tab for some models, there is a "Print Processor" button, left click it.
4. This is the spool format setting. It should be set to the default to "LEMF." Change it to "Lexmark." Under "Default datatype," select "NT EMF 1.008."
5. Click "OK" and exit back out to your desktop.
6. Please try printing again.