Can i get stored numbers without having to scroll down the whole list

To clear all blocked calls from your Panasonic KX-TG7871 phone, follow these steps:

1. Press the "Menu" button on the handset.
2. Use the up and down arrows to scroll to "Settings" and press "Select".
3. Scroll to "Call Block" and press "Select".
4. Scroll to "Block List" and press "Select".
5. Use the up and down arrows to highlight the number you want to unblock.
6. Press the "Erase" button, then press "Yes" to confirm.
7. Repeat steps 5 and 6 for all numbers you want to unblock.
8. When you are finished, press the "Off" button to exit the menu.

Note that if you want to clear all blocked calls, you will need to go through the list and erase each number individually. There is no option to clear the entire block list at once.

when the down load opens up on the screen, in a small tool bar at the top of the pdf section there are areas that show page numbers , zoom in / out expand size etc the number of pages will be there shown as 1 /24, or 50,or 600 etc ( 1 / of the number of pages in the down load )
if you click on the scroll bar on the right of the page proper and scroll down , as you pass each page break it shows the next page number
if you scroll down the page you will come to a contents list and that will also show the number of sections in the manual and that will indicate how many pages you can expect
to reduce paper wastage from a normal house hold printer when you print from the printer logo in the bottom right of the page you get the printer up and where it says print all , change that to print odd pages ( or even pages ) or or print pages and this is where you put in the pages that you want printed -such as 1,3 5, 7 etc
when the print run is finished put the whole lot of printed pages turned around and back in the printer then print the page numbers that you missed on the first print run this will result in a booklet with printing on both sides of the page and reduce the number of sheets used in printing

Go to Menu Select Apps in List View Scroll down the list of apps and if you have Play Store, you will have an app that says PLAY STORE. If you do not have it, download it. Go to Google Play Store

Access your blocked call list. Go to the main menu and scroll down; it should be one of the options listed there. Push the "Enter" key to access the blocked list once it's highlighted.2 Scroll down the blocked call list until you find the number that you want to unblock.3 Highlight the number and delete it from the phone's list.

You can not block that number.Your mobile will not support for that.
* You can do one thing.You can add that number to the screened list.
* If you add means your mobile will not ring if that person calls you.
* Their you will see the miss call information.
* If they send you message means it will be stored in the screened message.
* If you want to add that number means you should follow this steps.
* If you have miss call from that number means select that number there you will be having option select that option.
* There scroll over to add to scrn.list select that one.
* Then it will ask do you want to add this number to screened list.
* Select it.
* From now you wont get ring if that person call you.
* Message will be stored in screened message.Select message scroll over to screened message.In that you will find the message.


Thanks for your question.

You don't actually have to reset the whole phone, go to the Menu,click on the "Settings" option,scroll down the options that are there and select "Initial Setup", it is the sixth option on that dropdown list, select it and click on Time and Date option,check whether the "Auto Adjustment" box is checked, if it then remove the tick and then set the time or date as you wish,without setting up the whole phone.!

Hello,
The correlation coefficient does not have meaning (is not defined) for most regression models. Check you theory to make sure it exits for the sine regression.
An easy way to verify that, is to use the Command DiagnosticOn, accessible through the catalog [2nd][0] (CATALOG) . Press [X^-1] (D) to jump to first command that starts with D. Scroll down to DiagnosticOn, select it and press [ENTER]. Calculator replies Done.

Do your sine regression again. If the correlation coefficient has meaning for this type of regression, you will find it with the other statistical variables. You may have to scroll down the statistical variable list to verify the whole contents of the list.

Hope it helps.
Thank you for rating the solution.

well one time {i had the same fone}  my contacts started to scroll uncontrollably, like as soon as i was in "contacts" it just started scrolling down so i wen't to the verizon store and it said i had water damage so maybe that could be the case? Take the battery out of your fone and look at the little square on the back. If it is any color but purple {most likely green} that means ur fone has had water damage and that you will need it to get replaced.

From the standby screen, press Menu.
Scroll to and select Address Book.
Scroll to and select Contact List.
Scroll to desired contact, press Options
Scroll to and select Edit
Edit the desired fields, press Save

***Storing a Number for Speed Dialing*** 1 Press Phone Book on the control panel. 2 Press Phone Book or the scroll button (􀂥 or 􀂊) to display ?Store&Edit? on the bottom line of the display. Press Enter. 3 Press Enter when ?Speed Dials? appears on the display. The display prompts you to enter a location number, showing the first available number. 4 Enter a one or two-digit speed dial number between 0 and 79, using the number keypad or scroll button (􀂥 or 􀂊), and press Enter. If a number is already stored in the location you chose, the display shows the number to allow you to change it. To start over with another speed-dial number, press Upper Level. 5 Enter the number you want to store using the number keypad and press Enter. To insert a pause between numbers, press Redial/Pause. A ?-? appears on the display. 6 To assign a name to the number, enter the name you want. For details about entering characters, see page 1.14. If you do not want to assign a name, skip this step. 7 Press Enter when the name appears correctly or without entering a name. 8 To store more fax numbers, repeat steps 4 through 7. To return to Standby mode, press Stop/Clear. ***Sending a Fax using a Speed Number**** 1 Feed the document(s) face up into the ADF. For details about loading a document, see page 2.2. 2 Adjust the document resolution to suit your fax needs. See page 2.3. If you need to change the darkness, see page 1.20. 3 Enter the speed dial number. ? For a one-digit speed dial number, press and hold the appropriate digit button. ? For a two-digit speed dial number, press the first digit button and hold the last digit button. The corresponding entry?s name briefly displays. 4 The document scans into the memory. The fax number stored in the speed dial location is automatically dialed. The document is sent when the remote fax machine answers