At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Clarion Global
https://www.clarion.com > NX501A_ENG
PDF
• Press this button more than 1 second to stop video and audio media. [MUTE] Button. • Mute or Unmute the speaker. • The symbol on upper right area of the ...
138 pages
Did you tried reset procedure.There are two resets.
1) Soft reset.
2) hard reset.
The hard reset will delete all the data in your GPS so get the back up first before performing the hard reset.
If you want to try this, make sure you've backup the data in your unit before answering to Yes.---------------Reset procedure sets the unit to Factory settings on which the unit actually came to you.So all the sound and other settings get automatically set and unit mostly gets working in most of the cases.---------The procedure is as follows:---In the Quick Start Manual of Garmin Nuvi 255w GPS, it stated that you can reset the unit by pressing the RESET button at its bottom. However, the RESET button is not found on some Nuvi 255w.
Additional information in the Owner's Manual stated that if RESET button is not found, slide the POWER key and hold it for more than 8 seconds will do the same.-----------------The Hard reset Now:--Try this only if the above soft reset does not helps:---Another section in the Owner's Manual under the title "Clearing User Data" stated that holding your finger on the lower-right corner of the screen while turning on the unit and keeping the finger pressed until a message appear, that will allow you to delete all user-entered information.a message window pops up asking about "Do you really want to erase all user data?". There are 2 buttons to select, Yes or No. select "yes" to get the reset completed.Then check.----------------
Thanks. Keep updated for any more query. You can rate this
solution and show your appreciation.
Press the mute button and then turn up the volume button. If no sound still then press the mute button again. If we are talking about a Remote, then change the batteries.
Is this the style of Moxi remote that you have? If so try these steps to find your TV 1. Turn on the power to your TV. 2. Press and hold down the MOXI and OK buttons.at the same time until the LED at the top blinks twice. 3. Press the numbers 9910 on the remote and the led should blink twice again. 4. Press the mute button. If the TV mutes then press OK to lock in the code. If the TV does not mute press the up arrow once then press mute and continue to press the up arrow once then press mute until the TV mutes once the TV mutes press the OK button to lock in the code. *** Note this may take a couple minutes of trying to cycle through the code list to find which one will work with your TV *****
Maybe what you could try is getting a one for all remote control with a mute button on it. This may make the DVD play if you say that some other models work this way.
try master pass 3308
Childlock
The CHlLDLOCK function prevents chiIdren from watching TV.
HoId down the F button and then press the MUTE button until the symboI ? ?
appears on the screen, and the TV enters the CHlLDLOCK mode.
Except for the symboI? ?, the screen becomes blue back and mutes when
you press the buton to turn the TV off, then turn the TV on after setting the
CHILDLOCK function. To unlock the TV, hoId down the F button and then press
the MUTE button again.
Note:
The CHlLDLOCK can be set or cancelIed only by the remote controI. After
setting CHlLDLOCK, secure the remote control in a safe place
×