At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Usualy, plug it in, insert a CD or a tape and push PLAY.
If there is a malfunction, you need to be more specific. Or check with your closest TV/audio serviceshop.
Hi. Try moving it to a different room. If you have florescent lighting or too close to a fan or running electric motor. Check for bad ground on unit. Make sure speakers are connected properly. + to + - to - left to left and right to right. Hope that helps.
I have a fisher tad 9925 and no sound. I hooked up multiple speakers from another system with this unit and blew my output board. Need help on where I can purchase a replacement board?
hope it is not too late but have had the same problem, just got around to open up the case and found the problem and was able to fix mine and now it plays fine. My problem was with the cd turn table it was not be feeding the cd into the player causing the m-error..
Check firstly, if your radio is Fisher Tad-9415 you are in ****! The only chance which you have it is to make it repaired by the company. The price of repairing: $750 us address I do not know it. Sorry. But, keep really because the casset reader and the radio FM always works. I would pay $1000 us to renovate this radio if I was you! I hope that you is not too much over!
Three million times sorry.
M-Error is a mechanical error and could have a multitude of causes.
just went through it with a TAD-5160 unit where it was a small slip gear moving a tin lever to ingage the transport sled to insert or eject the disk from and to the carusel. You may have to take the unit apart and asess the problem.
Harleysp.
×