Question about Intel D101GGC Motherboard

1 Answer

Do i use the jumper to write a new bios? - Intel D101GGC Motherboard

Posted by james brown on


1 Answer

Terry Hair

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Intel Master
  • 4,134 Answers

No. The jumper just resets the BIOS to the default that the motherboard manufacturer installed in it. This is in case you make changes to the BIOS that causes the inability to boot up or access the BIOS. If you want to flash (rewrite) the BIOS, you need to use the procedure that the motherboard manufacturer provided with the firmware update. There is usually a hotkey method as well as a way to perform the upgrade from Windows, but not always.

Posted on Nov 19, 2015


Add Your Answer


Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer


Most of the new motherboards have done away with jumpers. All most all parameters are set though the BIOS page.The only jumper will be the BIOS resetting pins near the battery.

Aug 19, 2011 | Intel D101GGC Motherboard

1 Answer

Anyone know the bios key to get into a desktop e-machine? I have installed a new hard drive and another dvd drive but have to reset the bios to accept the new drive and I have forgotten the key to enter...

If you set a BIOS password and forgot it clearing the CMOS should clear all BIOS Settings to default.
if you don't know how to clear the CMOS, you will need to reset the jumper. To do this, you would have to open up the computer case, locate the CMOS battery and there should be a jumper right next to it. Take it off, gently so you don't bend the pins, and then wait for like 15 seconds then 'park' the jumper (put it back on)

Mar 14, 2011 | E-Machines eMachines Desktop PC

1 Answer

New larger hard drive can only be detected as Primary Slave

Floydage, some ribbons are different in the orentation of pin#1. try a differnent cable...but you said that you tried that right.? have you tried to make sure you have the latist BIOS. It could be this paticuler drive have a different bios it self...and yes drive's do have chip's and software in them. If nothing ells just load the OS to that drive anyway and than change the drive letters in windows.

Feb 16, 2010 | Computers & Internet

3 Answers

How to reset bios password on dell latitude e6400

The above answer is not totally correct. Any solution regarding removal of battery, shorting pins together, etc does not work. However, what does work is to use the Dell Asset/Service Tag BIOS Reset Tool. Find an Bootable CD ISO of the tool (can be found on torrent sites or email me and I can send), boot the CD image and when you are asked if you want to delete/change the service tag select "Y". When asked for the new service tag number re-enter your current service tag. Then the tools erases the BIOS and inputs the new service tag. A by-product of this process is that the BIOS master password is removed from the BIOS.I knowthis works because I just did it less than one week ago.

Nov 28, 2009 | Televison & Video

1 Answer

Asks for BIOS key

Turn the computer off, find the bios reset jumper put it on the other position, wait 10 seconds or more - no hurry, put the jumper back into the other spot, start up the computer and go into bios, remove the password if there is one or set a new one, take out off from start up

the location of the jumper is in the user manual. it should restore default settings, if it doesnt' unplug and take the memory battery out for over night and check it on the morning.

May 20, 2009 | Intel D946GZIS Motherboard

2 Answers

SATA drives not recognized by BIOS

you mean the CMOS jumper? Reread my problem. Try again.

Nov 17, 2008 | Computers & Internet

1 Answer

A friend install my mother computer. how to jumper

Set the jumper to recovery or to clear
CMOS Jumper
1-2 - Mostly normal
2-3 - Clear
0-0-0 Recovery no jumper

Its a basic conscept it can change according to your bios manual you follow - Trace the cmos jumper exactly dont short any other jumper

Jul 25, 2008 | EliteGroup Computers & Internet

1 Answer

P4S133 bios settings...

Check the jumper for the bios, it may be set for clear. (not an uncommon boo - boo). Move the jumper back to default pins.

Apr 09, 2008 | ASUS SiS Chipset P4S133 (P4S133/PA/LAN)...

2 Answers

Remove bios password

There are lots of tools/software available to reset bios password. Just google for "reset bios password" and you will find one of them, else just open your back side of your notebook. Open the screws and remove the bios battery (a circular shaped sitll battery). If possible change the battery with a new one or keep that battery out of laptop for some time. Now start notebook without the battery and shut down.Then reinsert the battery to laptop and start again. The password should be resetted by this process.

Feb 17, 2008 | Computers & Internet

Not finding what you are looking for?
Intel D101GGC Motherboard Logo

119 people viewed this question

Ask a Question

Usually answered in minutes!

Top Intel Computers & Internet Experts

Lee Hodgson
Lee Hodgson

Level 3 Expert

4810 Answers

Muntejaya Ginting
Muntejaya Ginting

Level 3 Expert

10422 Answers

Michael Thomas
Michael Thomas

Level 3 Expert

3053 Answers

Are you an Intel Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides