My itellipad only shows a blank screen and won't allow me to do anything. What's wrong with it and how do I fix it?

move you to TV
what in the world is an ALLAM? in what country google shows zero
why? a typo>?
1: get TV shop to fix it
2: get there service manual , tools and skills to fix it?
or sell it, most have zero value, for sure dead Plasma has zero demand/value now. OLED TV won.
best guess me, not in hand me and my meters and tool and my eyes.
is the PSU is bad.
the service manual has you check those first, as in NO POWER NO JOY.
all DC rails TEST GOOD.
and lots more,

go to the repair store near your block

to boot a cd then you must have the bios set to allow it, or tap f12 immediately to intercept boot menu and choose cd. sounds like your drive has a few bad disk sectors.

Hi John,

I see you mentioned you update IE9 then you now get a blank screen...

If I may ask the blank screen showed up after the update or did it show up after restarting the computer?

If your getting a Blank screen when you boot into windows after the IE9 update, try rebooting then boot into Safemode.

Restart you computer then as soon as you see the Boot screen of you computer keep on Tapping f8 to get a list select safemode, then once it boots into safemode windows will load up in safemode on the issue and you can navigate arround to fix things that went wrong.

click on the Start Button on the lower left of the task bar then, click on Programs, select accessories then select system tools, look for system restore then select the option select a different restore point, on the window you may see a list of restore points hoping your system restore was turned on in the very beginning, once you have selected a restore point keep on clicking next then a warning will show just click next again then it will restart your computer.

System restore allows you to restore to a date where you had windows working fine without any problems so if you can get a restore point before updating IE9 then it is possible that you may be able to fix you windows back the way it was.

I hope that this will help,

michaelvincentc

Try reseting it to factory settings plug it into the computer allow iTunes to start and it should fix the problem as long as it detects the device.

If this helped please rate

Thanks
Robert

the screen can be switched off to save power! Make sure screen is set to on position

my mp3 player is just showing a blank white screen. it wont turn on, wont turn off, my computer wont recognize it, nothing. whats going on and how can i fix it? thanx. anything will help at this point.
thanks dw [email protected]

This is the way how to examine what's wrong with your LCD monitors. After you turned it on and the screen went blank, you have to check that if you can see the image on the screen or not by shining a flashlight into the screen, not directly but find the best angle to the screen and take a look very closely. If you can see the icons or any image, there will be a minor problem. This is because of the lamps inside screen. Some of them were broken and it is very easy to replace. If you cannot see anything on the screen, there'll be some problems with inverter board. If you have soldering tool and want to fix it by yourself, check the caps first. It may cause this problem. Some caps might show leaking or burn spot on the board because of too high temp. If you don't have soldering tool, you better go get a technician to do so. Hope this help!! If anything I can help you with, feel free to let me know.
Thank you,

try pressing the in/out button that should fix a blank blue screen