Question about Pentax Photography
The IQ Zoom cameras are designed to display error codes (E0, E2, E9, E10, E1A, E37, E90, HL, H4, H5, etc.) when something goes wrong internally with one of the mechanisms or electronic components. These diagnostic displays help to determine where the problem is. When you see an error code, ask a qualified PENTAX repair technician to examine the camera. For information on a specific error code, call Pentax customer service department toll-free at 1-800-877-0155, Monday-Friday 7:30am-4:30pm, Mountain Standard Time.
Posted on Oct 06, 2005
SOURCE: Unexpected Rewinding
Could you be putting too much film onto the wind spool? Take the end of the film leader no farther than the RED/ORANGE marker at the spool. Too much film will cause it to bind and start rewinding.
Posted on Nov 19, 2006
error messages are for camera repair technicians and are found in repair manuals. have your camera checked by a camera repair shop tech.i would get an estimate first.
Posted on Dec 15, 2008
This is the technicians code telling the tech where to start the repair. It is time to replace this camera since the cost of repair is more than the camera is worth.
Posted on Nov 24, 2009
Tips for a great answer:
Usually answered in minutes!
Step 2: Please assign your manual to a product: