How do you change the ink cartridges in printer hp5530?

You know it's time to change your printers ink cartridge when the quality degrades or you start receiving the low ink alert messages. Here's a step by step tutorial on how to change an HP Printer Ink Cartridge. After turning on, open the printer's outer lid and print cartridge access door. Wait until the printer is in idle mode and the press down the old cartridge to get it released. Replace the new one in the slot. Make sure you do not touch the new ink cartridges. Close the lids of the printer and wait for test page to appear. https://connectmyprinter.com/how-to-change-ink-in-hp-printer/

Change Ink Cartridge in Epson Printer isn't a difficult. Just follow the simple steps to change ink cartridge in Epson Printer:

·Turn on Epson printer·Open its cover or scanner then left the unit of the scanner and wait for it.
·Ensure that the print head is at replacement position. If not the press "Maintenance" button.

Follow the more steps to change ink cartridge in Epson Printer.

CL41, this is the one you are using for your cartridge.

Did you change your cartridge with brand new one or refilled one??

If you did with refilled one, the ink level won't go back with full.

-------------------------------------------------------------------------------
This is the method how printer measures the ink level.

1. Each cartridge has a serial number.
2. As soon as installation in printer, printer recognizes the cartridge by serial #.
3. And the printer starts to count the printing document.
4. After reaching certain print counting, the ink level will show "low ink"

So my answer is even if you refilled your cartridge, the ink level won't change,
since printer cannot weight the cartridge or.....some other technology to measure each color ink level.

Thanks.

Are you using Dell Series 5 ink cartridges? Dell Series 5 ink cartridges have a cartridge that cannot be reset.

Article on refilling Dell ink cartridges

It's possible to get a bad Dell Series 5 ink cartridge. Return to place of purchase for a replacement.


Rick

Changing a printer cartridge is not complex but improper handling of the parts may damage the printer and the cartridge. If the user notices that while printing the ink comes out dry or faded, it may be time to change the ink or the toner. The user will know if it is time to change the toner because instead of a sharp image, one will get a faded image. It is time to change the ink cartridge when the printing comes out spotty or colors are used to replace others —for instance, blue for black or yellow for red. Remember, faded images signal the need to change the toner; spotty printing signals the need to change the ink cartridge get more help for change cartridge .
Hope this helps you.

Calibrate your new blank ink cartridge, have some nozzle check, cleaning check, and printer alignment. This are procedure that new ink cartridge will have to calibrate before you use. Epson printer are very sensitive when capable of changing ink cartridge. Unlink HP directly work without any print test because the cartridge head and ink join together, Epson with ink cartridge and the head separate.
Have some test on it at Printer Maintenance.
I'm sure 100% works on it.
Good luck!

clean the contact points on the ink cartridge.an eraser will do

Lift the priner unit lid on the printer llift he print cartridge lid,
The ink cartridge carrier moves and stops at the loading position unless the printer is busy.

Press down on the ink cartridge lever to raise the ink cartridge lid.
Remove the old ink cartridge.
Dispose of the old cartridge properly.

If you are installing a new ink cartridge, remove the sticker and transparent tape from the back and bottom of the ink cartridge.

Insert the new ink cartridge.

Snap the lid closed.
Lift the printer unit, and hold the scanner support up while lowering the printer unit until it is completely closed. Let me know if you have any questions.

Turn on the printer.
lower th epirnter's output tray, pull out the extension, and open the cover.
press and release the ink button.
if your ink lights is on or flashing, the printer head moves to the left, and the cartridge that need to be replaced stops under the ink out mark.
open the cartridge cover
Pinch the back tab of the empty cartridge as your left it out of the printer.
shake the ink cartridge 4 to 5 times while it is still in the package.
unwarp the new ink cartridge and lower it into the holder. Push down gently until the cartridge is firmly seated.
repeal the procedure if more than one ink cartridge is out.
close the cartridge cover.
close the printer cover and press the ink button.
The green power light flashes and the printer makes noise. charge takes about a minutes. When it's finished, the green power light stops flashing and stay on, and the red ink light should go out.

Here is the manual

http://support.dell.com/support/edocs/systems/725/en/index.htm
Replacing an Ink Cartridge

1. Turn on your printer.
   
   
2. Lift the front cover.
   
   

The ink cartridge carrier moves and stops at the loading position unless the printer is busy.

1. Press down on the ink cartridge lever to raise the ink cartridge lid.
   
   

1. Remove the old ink cartridge.
   
   

1. Dispose of the old cartridge properly.
   
   
2. If you are installing a new ink cartridge, remove the sticker and transparent tape from the back and bottom of the ink cartridge.
   
   

1. Insert the new ink cartridge.
   
   

1. Snap the lid closed.
   
   

1. Close the front cover.