Question about Whirlpool Duet 3.8 cu. ft. Front Load Washer

How do I replace the start button? - Whirlpool Duet 3.8 cu. ft. Front Load Washer

Add Your Answer

Upload

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

Loading...

Include an image. It's worth a thousand words.

prev next

Related Questions:

1 Answer

On button does not hold starting circuit.when start button is released drum stops turning

when you hit the start button it sends power to motor the start switch on motor is bad some modles you can replace motor switch but most of the time you need to replace motor

Mar 03, 2015 | Dryers

1 Answer

Kenmore model 110.76862500 dryer

You have a defective Start button replace the start button and you will be fine. Any Sears store can get you a replacement.

Jan 24, 2008 | Kenmore 63942 Dryer

1 Answer

Dishwasher won't start and start button doesn't light, but other buttons respond

I think you still have warranty, it sounds you have faulty control panel, even if it's new does not mean it is good.

Mar 19, 2013 | Kenmore Dishwashers

1 Answer

The start button on my Goldstar MV1526W microwave quit working. For a while we could make it work using one of the quick start buttons. Will replacing the Key pad fix the problem?

Yes! the keypad will need to be replaced, but there is a possibility the keypad control board may also need to be replaced.

Jul 09, 2012 | Goldstar MV-1526 Microwave Oven

1 Answer

Kenmore Ultra Wash 665 dishwasher: start button not lighing

It sounds like you have a bad control console, and the problem is that your START button (the most critical one!) is bad. You can't replace just that button or key; you have to replace the entire control console.

If you need further help, reach me via phone at https://www.6ya.com/expert/ronald_e6b9572cebe3ad27

Jul 02, 2012 | Kenmore Dishwashers

1 Answer

Start button broken

front panel will need to be taken off ..pcb assy removed ...refit new button ...replace pcb ..panel on

Jan 04, 2010 | Washing Machines

1 Answer

I hit power button then start start light flashes and wont start

If your start button is flashing even when you hit your start button . Your electronic touch control board (ETC) is not working correctly . Either the intergrated curcuit board is not responding or the actuator on touch panel is broken . Push start button in and see if the button makes a clicking noise. If it does replace curcuit board , if it does't replace the part where you touch.

Oct 09, 2009 | Whirlpool Cabrio WTW6600SBT Top Load...

1 Answer

Button not working correctly

the button is fine
the button starts a relay that controls the very high currents for the heaters and motor
the relay is dead, or has come loose from its connections
if the cables have come off reattach them
otherwise, replace,
not expensive to replace ~$29

trace the cables from the button to the relay