Printer error 6000, on a canon Mp610 printer. i tried what the manual said [disconnect USB cable... etc] shut down, restart. printer still says error!!!!

The 6000 error is a generic internal error code. Unfortunately, it could mean one of many things. To resolve the 6001 error, please follow the following steps:

1. Turn off the printer and disconnect the power cord and USB cable.
2. Remove paper from the automatic sheet feeder (in the back).
3. Gently pull jammed paper out, if any.
3-1. If paper is visible from the ASF, use both hands to pull the paper out slowly.
3-2. If paper is visible from the paper output slot, use both hands to pull the paper out slowly.
4. If the paper tears and a piece of that remains inside the printer, open the printer cover and remove the paper from inside the printer.
5. Check ASF with a bright light to check for obstructions. Remove any if found.
6. Open the rear cover to check if the paper is jammed.
7. Pull out the cassette and check if the paper is jammed inside the cassette area.
8. Load paper back into the ASF or cassette.
9. Reconnect the power cord, turn on the printer and confirm that the Alarm light is off. (If there was any jammed paper remaining in the printer, the paper may be automatically ejected.)

If the above procedure does not resolve the error, the unit would require service:http://www.usa.canon.com/cusa/page.action

Check on the Canon website under support. Enter your printer model number and the error code.

1. Turn off printer
2. Unplug all cords
3. Press ON button 5 times in a row
4. Plug printer back in
5. Try printing

If this doesn't work, call Canon
1(800)-ok-canon

This is the error code printer Canon IP1200, IP1300, etc. light blink Indicator:
3x orange 1x Green = mechanical error
if you dont have any knowlegde about printers, better bring your printer to Canon service center.
4x orange 1x green = printer absorber full
reset your printer using software ressetter or try using manual reset. different printers have different manual reset.
5x orange 1x green = black cartridge/color cartridge error
can be chip error or connector is dirty.
7x orange 1x green = black cartridge/color cartridge error
can be chip error or connector is dirty.
8x orange 1x green = printer absorber full
reset your printer using software ressetter or try using manual reset. different printers have different manual reset.
12x - 17x orange 1x green = cartridge detection error

How to Reset waste ink counter Manually 1. Unplug power and USB cable. 2. Open door and hold power button. 3. Connect power. 4. Close door, then release power button.

How to Reset waste ink counter using Resetter
1. Download software for Canon iP1200 printer. DOWNLOAD 2. Unzip downloaded file to any location using, 7ZIp, WinRAR, Winzip, etc 3. Run GeneralTool.exe 4. select connected USB port number from USB port 5. Click LOCK RELEASE, and select the applicable model name in SET DESTINATION 6. In CLEAR WASTE INK COUNTER, select MAIN or PLATEN. the selected waste ink counter will be reset.
Thank you for posting. Hope this helps.

1. Unplug the Canon MP610.
2. Click on the Start Menu, then Control Panel. Open the Printers, or Devices and Printers control panel. Find your Canon MP610 printer and Delete or Remove the device by Right Clicking on the device and selecting Delete or Remove.
3. Restart the PC.
4. When in Windows, plug your Canon MP610 in and wait for device installation to complete, or reinstall the CD drivers.
5. Try printing a test page.

I’m happy to help further over the phone at https://www.6ya.com/expert/jeremy_69f3cc28d95bf514

Delete Queued Print Job If a print job is corruptand does not print clearly, does not print at all or is preventingother queued jobs from printing, delete the queued job.

1. On the Windows taskbar, double-click the printer icon located to the left of the time.
   
   
   
   
2. At the Printer window, select the print job, under 'Document Name' column, to highlight it.
   
   
3. From the 'Document' menu, select 'Cancel'.
   
   
4. Repeat steps two and three to cancel another print job.
   
   
5. Ifthe print job cannot be cancelled or will not stop printing, shut downthe compuer, disconnect the printer cable and then restart the computer.
   
1. Close the Printer window.
   
2. Shut down the computer.
   
3. Disconnect the printer cable (USB or parallel cable).
   
4. Restart the computer.
   
5. If a message window appears asking to cancel printing, select 'Yes'.
   
6. Verifythe printer icon no longer appears on the Windows taskbar. If the iconappears, double-click it and cancel the remaining print jobs asinstructed on steps two and three.
   
7. After all print jobs have been cancelled, reconnect the cable to the printer and then try to print again.
   
   
6. Ifthe print job does not complete, it may be necessary to disconnect theprinter cable, power off and on the printer and then reconnecting thecable.

Many other machine users who use Canon's wireless printer for work-related or special printing work frequently find that their printer does not respond at any point in time. If you feel the Canon Printer Not Responding to issues on a regular basis, it is best to ask the aid of expert Canon Printer Repair Technicians or Complete Solution BLOG, as they will be able to solve the problem quickly. The key reason behind Canon Printer Not Answering Error is a lack of information between your PC and your printer. If this is the Canon Printer Not Responding Mac, there are a few steps below that could help you solve the problem.

Reasons that Makes [Canon Printer Not Responding]:-

>>The printer driver is configured with an improper port.

>>An incorrect access point was selected during the initial setup.

>>3rd party firewall or antivirus software is interfering with the printer software.

>>USB problem that refuses to establish contact under Windows (if a wired connection is used)

Complete Blog: Canon Printer Not Responding

Thanks for reading..!

Try this, uninstall the printer drivers and shut down the system.
Disconnect the USB cable and restart the computer.
Once in windows reconnect the USB cable and let windows find the printer and install it.
If it asks for the CD insert it and follow the onscreen prompts.

PLEASE REMOVE THE POWER CABLE AND REINSERT IT IT SHOUL BE OK AND IF STILL PERSIST JUST RESTART THE PC IF STILL RESIST PLEASE LET SOME TECHNICIAN TO CHECK FOR THE SENSOR FOR THE PAPER JAM ...
GOOD LUCK

just unistall the usb printing support from the device driver then you you restart then you put the printer cd in the rom and try, post your comment