I have a Bosch wall oven in my unit but no user manual. The number on the door is bosch hbe632uau/03. Is it ok to close the door when using grill function or will the glass blow out?

Perhaps you can provide the model number so we can better assist you, such as helping your find the user manual.

Usually the screws keeping the wall oven in its space are through the sides of the oven. With doors open look on both sides for screws that go into the cabinets

try going to goole.com and put in appliance parts there will be a number of sites that will come up many in the USA that have many parts.

Please double check the model number on the unit. On the Bosch site, I found a number of models with that started HBN1312* . However the model number had another digit after the 2 and the zero was followed by a letter and a slash before additional numbers.

The model HBN131220B/01 is an all electric oven. The external dimensions for the wall oven are 595mmx595mmx515mm. I'm not sure about the internal capacity for the unit. Some documentation (including the user's manual) are available from the Bosch support site: http://portal.bsh-partner.com/portal%28bD1lbiZjPTA2MA==%29/PORTALFRAME.HTM . Enter HBN1312 in the search box to find the documents.

I hope this helps.

Cindy Wells

That must have a model number. Say it. By reading user manual available for it online i can help you

I found a users manual for Bosch wall ovens at Retrevo.com

http://www.retrevo.com/s/Bosch-HBL755AUC-Ovens-review-manual/id/925ci470/t/1-2/

Here is the link to the PDF:

https://portal.bsh-partner.com/TCcustomBSH/controller/download_file?PDFOBID=rkfgKGdcdcso0pdmdb---E0C&UMOBID=rkfgKGgcdcso0pdmdb---E0C

Hi,

Can you provide a model number for your oven. Is it a single oven or double ? Wall oven or free standing range ?(conventional with cooking surface)

Unfortunately the error codes for Bosch are different depending on the model of the unit.

Thank you, I`ll look for your reply.

macmarkus :)

On our oven (Bosch Evolution 700 Series HGS7152UC), the problem was getting worse and worse. I found it is was worsening simply because the hinges had started to come loose. I removed the door as suggested above, and although there are no adjustment screws on this model I tightened the now-loose hinge mounting screws. For each hinge there are three screws altogether: two (phillips heads) on the bottom of the door and one (torx head) on the inside wall of the door. After tightening those screws it is a lot better, only leaks as much heat as it did when it was new which is tolerable. Still a bad design.

My husband just figured this out.

- Follow Door removal instruction from the manual.
- There is a screw at the end of the hinge that can be adjusted.
- Adjust the screw to desired height.
- Secure lock nut.