- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Hi, The first thing to do is troubleshoot your TV independent to any other service provider that has a box that probably connects to your TV via a HDMI cable or old version scart.
Simply turn off your TV and turn off the socket that the TV is plugged in for 20 mins. Also turn of any Virgin media boxes.
After 20 mins turn on the TV. Do not worry if you get a message saying no signal detected. Wait and see if the TV stays on with no messages such as auto-standby. If the TV remains on with no problems then turn on your Virgin Media Box. The box will need to initialise ( about 30 seconds ) and then the TV should recognise the HDMI signal and you will see the Virgin TV.
If your TV turns off at any point during this process you have a fault with the TV, If when you turn on the Virgin box and no signal is detected you have either a cable connection problem or a Virgin Box problem, so using your TV REMOTE turn your TV back to ARIEL input to receive the normal television broadcasts via your Ariel that give you the normal freeview television that all modern TV's can receive, if you can get the normal reception contact virgin support who will troubleshoot your problem.
Virgin MediaTo clear your changes and reset your remote to its original settings: Press and hold down and on the remote at the same time until the light on the top of the remote flashes green twice. Press three times, then press. The LED will flash green four times and exit programming mode.Missing: vm202 alcatel
Sounds like you could have some infections. Try downloading Malware bytes, and Combo Fix. These programs should help you to see if you need to clean up your PC. If you have windows 8.1 and can't use combo fix get C Cleaner. Just google these names and they will lead you to where you can download them. Use malware bytes before you use either of the other two.
Get them from the net gear router if you can.
Or one of the PC's connected to the network.
the subnet and the router you need will be identical to that of the PC.
the only change you need to make to the IP address is to make sure that the last octet is different to all others on the network.
The IP address is made up of 4 octets. looking something like 192.168.1.28
or similar. In this instance 28 is the last octet.
DNS is not required for this setup.
Set-up instructions are so much to type in here, and is not possible too. If you wish to get more details, check the sites linked here. It has set-up code list and set-up procedure to most popular remote controls. http://electrohelponline.blogspot.com/http://electronicshelponline.blogspot.com/ Pull up previous posts there, either by type
in the model name to your set in its search box, or view it in Timeslide
/ Mosaic option.
Hi there, This will be a problem with either the Scart leads (9 times out of 10) or the virgin media box. Not a problem with the signal coming from Virgin Media. Try checking the scart leads are not loose, or looped through the wrong way. Hope this helps TV_Doctor