Question about Razor 300001-SL Ground Force Go Kart

Open Question

I'm working on a trail master gokart it will start then shut rite back off. Push gas in it will start but won't reve it act like it missing clean carb same thing got new carb same thing

Posted by Matthew Michaels on


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I go a trail master go cart 150cc it will start then shut rite back off push gas in it starts but won't rev up clean card same thing got new car still same thing

I answered this this afternoon!

When you installed the new carburettor did you check the new main jet was the same as the old one? Do you see a screw on the outside of the carb with possibly a spring on it? That is the air mixture screw and needs fully tightened (but not too hard) and then backed out by a certain number of turned. On a bike of mine it was 1.5 turns out. Also the needle inside the carb has slots in it and a circling that needs to be in the right slot. You really need a workshop manual when doing work like this.

Finally the linkage to the carb has an adjuster to set the idle revs, BUT the carb has to be set up correctly first.

Oct 02, 2015 | Cars & Trucks

1 Answer

Carb on big bear 350 quad was plugged from sitting ,took apart and cleaned ,bike won,t idle unless choke is out a bit ,but if you push choke in and keep reved up will run ,also backfires when letting off...

it is a garantee that the main jet is stoped up with that grayish dried gas minerals..this not in the main jet valve you can remove,but actually in the bore on the carb body... you can try to use torch tip cleaner to open the hole ...hope you the best is a very hard substance...someone tried starting the bike after being set up for a while without removing carb and cleaning first.....sincerely;R.B.V.

May 18, 2013 | Motorcycles

1 Answer

Murray tiller wont start

first check for spark if no spark check the oil some have a low oil shut off next try and spray some carb cleaner if it fires on that you may need to clean the carb

May 16, 2012 | Garden

2 Answers

HI there, I got a lawn mower mtd yard machine briggs ans stratton 4,5 hp, it start pretty well but won't stay running, I change the spark plug, oil, gas brand new, clean the carburator, clean the air...

There could well be a build up of sediment and debris in the main jet to the carburetor. It is easy to get to and clean. It is the brass bolt that holds the lower float bowl onto the main body of the carburetor. To clean it, drain your gas. Remove the bolt and external washer UNDER the carburetor bowl. Clean out the bowl of any sediment and/or water. To clean the brass bolt, use no metal objects. Carb/Choke aerosol spray cleaner will do the job. Pay close attention to the hole in the bottom of the bolt and the very small holes about 2/3 of the way up the bolt. Clean till shiny with holes cleared and reinstall. Your fuel flow problem and shut off condition may be solved.

Jun 05, 2011 | Mtd 22" Yard Machine Push Mower

1 Answer

McCulloch EB358A starts but acts like it is running out of gas

ok you have what sounds to me a blockage in the carb. take it off and thouroughlly clean it. check the diaframs in the carb to see if they are hard and stiff. if they are hard and stiff replace them and clean the carb really well and see if this works.

Oct 24, 2009 | Garden

Not finding what you are looking for?
Razor 300001-SL Ground Force Go Kart Logo

Related Topics:

105 people viewed this question

Ask a Question

Usually answered in minutes!

Top Razor Toys Experts


Level 3 Expert

858 Answers

Andrew Taylor
Andrew Taylor

Level 3 Expert

32425 Answers

Dennis Key
Dennis Key

Level 3 Expert

2481 Answers

Are you a Razor Toy Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides