I have lost my installation Cd for my digital rebel XT (canon) I downloaded the driver from Canon. com but computer will still not find the device?? When I try in Media Center, it shuts down the program??? Help This is a brand new laptop, so should not be a computer issue?

Please get it at these links : www.nodevice.com/driver/.../Canon/Digital_Cameras.html
www.softwarepatch.com/utilities/powershot.html
www.usa.canon.com/...camera...digital...cameras/eos_digital_rebel

regards

You can download Vista drivers and utilities from Canon site (http://software.canon-europe.com/products/0010192.asp). Select "Windows Vista" as operating system and click "Submit" to filter vista-compatible software.

You can download the driver for your OS and camera at
http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&tabact=DownloadDetailTabAct&fcategoryid=314&modelid=11154
Please rate this solution. Thanks.

You can download the drivers for XP here

And for Vista Here


I hope this will help you out.

Regards, WAQAR.

I have created an ISO image of my Canon 350D software CD and uploaded it to filefactory.com
You can download it here http://www.filefactory.com/file/aga8gc6/n/EOSv10_zip
You should be able to get a free download slot, keep trying if the server is busy.

If you do not have software which can extract the ISO file, try the excellent CDBurnerXP, completely free from http://cdburnerxp.se

Once you have burned this to a CD, just insert and the Canon installer menu should automatically appear.

Please take the the time to rate this solution.

The drivers are located on the Canon website:

http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&tabact=DownloadDetailTabAct&fcategoryid=314&modelid=11154

Use the drop down box labeled "Select OS" and select Windows Vista (x64).

Go to the Canon website and download the EOS Utility. All the software for your camera is there for download.

You need to install the correct software on your computer. They are usually called drivers. Here is a link to the Canon Rebel Xt page from Canon with all sorts of goodies you can download. The most important section to get things going for you is the drivers. Select your OS from the drop down list, download and install. If you don't have drivers your PC or Mac doesnt recognize the fine piece of hardware... your camera. Hit me up if you're still stuck.

Yes, you need a driver so that your operating system understands how to interface to your camera. Canon Europe has a handy web page:

http://software.canon-europe.com/products/0010192.asp

Enter your operating system and language, and you will get the choices of things that can be downloaded relevant to your camera. If you were using Windows Vista, for example, your choice would be "Canon Camera USB WIA Driver for Windows Vista". Install that, reboot, and then connect your camera again. It should be recognized by your computer.

This solution works. I spent a lot of time on the Canon site trying to download a driver for Windows Vista. It was all wasted. Thanks for the help.